July 15, 20223 yr One of my disks is showing an error. I've attached the smart report. Is it time to replace this disk or is it a harmless error? Thanks. tower-smart-20220715-0801.zip
July 15, 20223 yr Community Expert ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 872 197 Current_Pending_Sector -O--C- 100 098 000 - 152 198 Offline_Uncorrectable ----C- 100 098 000 - 152 replace
July 15, 20223 yr Community Expert I doubt this all happened at once. You should have been seeing SMART warnings for this disk on the Dashboard page. Do you have Notifications setup to alert you immediately by email or other agent as soon as a problem is detected? 3 minutes ago, trurl said: attach diagnostics to your NEXT post in this thread Maybe you have other problems you haven't noticed.
July 15, 20223 yr Community Expert 5 minutes ago, trurl said: doubt this all happened at once Just checked this same disk in some diagnostics you posted in May, at that time it only had a few reallocated so maybe these are all recent.
July 15, 20223 yr Author I have notifications set up. I just received warnings the past day or two that's why I ran the smart check. Diagnostics are attached. tower-diagnostics-20220715-1058.zip
July 15, 20223 yr Author I have done this before, if I recall: 1. Stop the array 2. Unselect malfunctioning disk 3. Start the Array (missing disk will be emulated0 4. Shut down the server 5. Replace the disk 6. Start the server 7. Stop the array and select the replacement disk 8. Start the array and the replacement disk will be rebuilt. Procedure good?
July 15, 20223 yr 21 minutes ago, Woodpusherghd said: I have done this before, if I recall: 1. Stop the array 2. Shut down the server 3. Replace the disk 4. Start the server 5. Select the replacement disk 6. Start the array and the replacement disk will be rebuilt. Procedure good? Pretty sure you have unneeded steps in there, only used if forcing a rebuild on the same physical disk.
July 16, 20223 yr Community Expert 15 hours ago, Woodpusherghd said: 1. Stop the array 2. Unselect malfunctioning disk 3. Start the Array (missing disk will be emulated0 4. Shut down the server 5. Replace the disk 6. Start the server 7. Stop the array and select the replacement disk 8. Start the array and the replacement disk will be rebuilt. It will emulate the disk when it sees the original disk is missing.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.