tubesides Posted August 21, 2022 Share Posted August 21, 2022 My server has been running for a long time with no changes. Then I noticed an error from the OS that my 2nd parity drive had errors and was disabled. I downloaded the diagnostic and to test I did the procedure where you stop the array, unassign the parity drive, start, assign parity etc and have it rebuild parity. However, soon after the same error occurred, the drive lost parity and was disabled again. I'm posting the diagnostic results here in case that indicates what I should do next. tower-diagnostics-20220731-2039.zip Quote Link to comment
trurl Posted August 21, 2022 Share Posted August 21, 2022 Are you sure those diagnostics are current? They seem to be 3 weeks old. Quote Link to comment
tubesides Posted August 21, 2022 Author Share Posted August 21, 2022 This is the original diagnostic I ran before I rebuilt parity. Soon after I lost parity and the drive disabled a second time there were brownouts where I live so I turned the server off. I'm only now dealing with it. Would it be valuable to turn the server back on just to perform a more current diagnostic? Quote Link to comment
Solution trurl Posted August 21, 2022 Solution Share Posted August 21, 2022 Looks like parity2 disk is failing. Replace Quote Link to comment
tubesides Posted August 21, 2022 Author Share Posted August 21, 2022 Okay, that's easily done. Thanks for the input. I'll mark this as solved. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.