Solution Conson Droppa Posted August 31, 2022 Solution Share Posted August 31, 2022 (edited) EDIT SOLVED = Deleting "network.cfg and network-rules.cfg at the same time and rebooting resolved this. I installed a Mellanox ConectX-3 10Gb NIC and it works fine to my UniFi Agg switch. My MoBo already has two 1Gb eth ports. I am trying to assign the new card NIC as eth0 but it is not in the dropdown menu as an option under interface rules. I can only see the two 1Gb ports. I have read about 50 post with similar questions but none of their solutions helped me. I have tried to delete the contents of "network-rules.cfg" and reboot I have tried switching back to a 1Gb port in hopes of "freeing up" the 10Gb NIC. I have set all three ports to different subnets in case that was an issue. And attached diagnostics in case someone can help. I have tried running: ifconfig -s -a and I get: Iface MTU RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg br2 1500 704120 0 9 0 183746 0 0 0 BMRU br-7d2d9 1500 0 0 0 0 0 0 0 0 BMU br2.40 1500 13697 0 0 0 2740 0 0 0 BMRU docker0 1500 163904 0 0 0 658842 0 0 0 BMRU erspan0 1450 0 0 0 0 0 0 0 0 BM eth0 1500 14411 0 0 0 3127 0 0 0 BMRU eth1 1500 0 0 0 0 0 0 0 0 BM eth2 1500 725989 0 48 0 191279 0 0 0 BMPRU eth2.40 1500 13697 0 0 0 2736 0 0 0 BMPRU gre0 1476 0 0 0 0 0 0 0 0 O gretap0 1462 0 0 0 0 0 0 0 0 BM ip_vti0 1480 0 0 0 0 0 0 0 0 O lo 65536 18358 0 0 0 18358 0 0 0 LRU shim-br2 1500 19623 0 0 0 17251 0 0 0 BMRU shim-br2 1500 4096 0 0 0 1091 0 0 0 BMRU shim-eth 1500 5996 0 0 0 2021 0 0 0 BMRU sit0 1480 0 0 0 0 0 0 0 0 O tunl0 1480 0 0 0 0 0 0 0 0 O veth0283 1500 8632 0 0 0 8762 0 0 0 BMRU veth0c67 1500 0 0 0 0 97 0 0 0 BMRU veth3c83 1500 148633 0 0 0 643222 0 0 0 BMRU veth4ace 1500 107 0 0 0 218 0 0 0 BMRU veth4bcd 1500 0 0 0 0 100 0 0 0 BMRU veth4dd9 1500 5 0 0 0 104 0 0 0 BMRU veth53c9 1500 993 0 0 0 1073 0 0 0 BMRU veth64e7 1500 212 0 0 0 323 0 0 0 BMRU veth80bc 1500 1944 0 0 0 2397 0 0 0 BMRU veth8da1 1500 0 0 0 0 86 0 0 0 BMRU vethc67a 1500 1482 0 0 0 1313 0 0 0 BMRU vethd1a4 1500 943 0 0 0 1408 0 0 0 BMRU vethf6b3 1500 191 0 0 0 288 0 0 0 BMRU vethf817 1500 357 0 0 0 466 0 0 0 BMRU vethf83d 1500 385 0 0 0 507 0 0 0 BMRU vethfbe8 1500 15 0 0 0 118 0 0 0 BMRU vethfcbe 1500 5 0 0 0 108 0 0 0 BMRU unraid-diagnostics-20220830-2003.zip Also no stubbing in syslinux area: default menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest label Xen/unRAID OS kernel /syslinux/mboot.c32 append /xen --- /bzimage --- /bzroot label Xen/unRAID OS Safe Mode (no plugins) kernel /syslinux/mboot.c32 append /xen --- /bzimage --- /bzroot unraidsafemode EDIT SOLVED = Deleting "network.cfg and network-rules.cfg at the same time and rebooting resolved this. Edited August 31, 2022 by rmeaux Quote Link to comment
theryno Posted March 5, 2023 Share Posted March 5, 2023 Had this very same problem on version 6.11.5 and was banging my head against the wall for hours till I found this thread. Thank you!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.