September 3, 20223 yr I use unraid mostly for Plex and have been having issues with unraid locking up and not responding. I spend a lot of time on the road so i notice it when i go to watch something and plex isn't available. It's happening more and more frequently. The only fix i have for now is to have the wife do a hard shutdown. I had her take some photos of the monitor that i plugged in since this has been happening. I thought it was the C state on the BIOS settings but unraid is still crashing even after i disabled it. Any help would be greatly appreciated!
September 3, 20223 yr Community Expert attach diagnostics to your NEXT post in this thread setup syslog server
September 4, 20223 yr Community Expert Has it crashed since you setup syslog server? 5 hours ago, BirdHeezy said: C state on the BIOS settings
September 4, 20223 yr Author 10 hours ago, trurl said: Has it crashed since you setup syslog server? Yes. The "new text doc" is the syslog that I attached. Not sure how much of it you need but I took the last sever lines before it stopped writing out. Edited September 4, 20223 yr by BirdHeezy
September 4, 20223 yr While this might not be your issue, remove the incompatible docker folder plugin and install the replacement that is compatible from CA.
September 5, 20223 yr Community Expert 14 hours ago, BirdHeezy said: The "new text doc" is the syslog that I attached. Not sure how much of it you need but I took the last sever lines before it stopped writing out. Better if you zip all of it
September 5, 20223 yr Author 15 hours ago, trurl said: Better if you zip all of it syslog.zip From what I can tell the crash happened at time stamp Sep 2 19:14:54 Edited September 5, 20223 yr by BirdHeezy
September 9, 20223 yr Author On 9/3/2022 at 7:59 PM, trurl said: Has it crashed since you setup syslog server? Happened again. Here's the diagnostic and syslog file elmo-diagnostics.zip
September 9, 20223 yr Community Expert Switch to ipvlan (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)). Also and since btrfs is detecting data corruption run memtest.
September 9, 20223 yr Author 2 hours ago, JorgeB said: Switch to ipvlan (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)). Also and since btrfs is detecting data corruption run memtest. Will do! Changed the network type. The memtest, looks like you boot up unraid and then there's a memtest option before you choose which unraid type to boot (GUI or otherwise?) I've never done that before. My disk 2 has a UDMA count that goes up a few counts on every power cycle. I read that that doesn't seem to be a big concern but curious what you thought.
September 9, 20223 yr 1 hour ago, BirdHeezy said: there's a memtest option before you choose which unraid type to boot (GUI or otherwise?) I've never done that before. That option only works if you aren't using UEFI bootup. A better option is to download the new version from memtest86 and create a different USB boot stick to run it.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.