tknx Posted September 9, 2022 Share Posted September 9, 2022 So I want to setup Wireguard as tunneled access to my various VLANs (10.0.0.0/22; 10.0.20.0/24; etc.) I can get the Wireguard tunnel to access anything in my main LAN which is the 10.0.0.0 one where the Unraid server lives, but nothing on the 10.0.20.0 (vlan ID 20) one. Settings are here for my Unifi router and Unraid WG: https://imgur.com/a/77uP7pT Quote Link to comment
venicenerd Posted November 3, 2022 Share Posted November 3, 2022 Hey @tknx did you ever figure this out? I'm experiencing the same issue. Quote Link to comment
tknx Posted November 4, 2022 Author Share Posted November 4, 2022 No - I have noticed that any questions related to networking issues rarely get answered. People just say delete 'network.cfg' as the only solution. Quote Link to comment
Hoopster Posted November 4, 2022 Share Posted November 4, 2022 (edited) 18 minutes ago, tknx said: No - I have noticed that any questions related to networking issues rarely get answered. People just say delete 'network.cfg' as the only solution. The problem @venicenerd was having was resolved by setting up a static route between WireGuard network and unRAID server IP as explained in the Complex Networks section of the first post of the WireGuard Quickstart Edited November 4, 2022 by Hoopster Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.