Tygger Posted September 11, 2022 Share Posted September 11, 2022 My power supply died. I swapped with a old PSU I had laying around and now I'm getting missing devices. Attached is my diagnostics. Any idea what's going on? Thank you tower-diagnostics-20220911-1931.zip Quote Link to comment
trurl Posted September 12, 2022 Share Posted September 12, 2022 Are these modular PSUs? The cables aren't interchangeable. Quote Link to comment
Tygger Posted September 12, 2022 Author Share Posted September 12, 2022 No, not modular, but I did just order a EVGA 850BQ. Wasn't sure if they PSU I swapped in was bad... but now I think I need to cancel my order for a non-modular? Quote Link to comment
JonathanM Posted September 12, 2022 Share Posted September 12, 2022 34 minutes ago, Tygger said: now I think I need to cancel my order for a non-modular? Why? Modular PSU's have their upsides, especially for systems with glass sides. For servers though, the fewer removable connectors the better. Every non-solid connection is a point for possible failure. The point trurl was making was that your description matches exactly a scenario we've seen a bunch of times, somebody swaps PSU's but leaves the modular drive power cables connected to the drives, and as soon as the replacement supply is turned on, the wrong voltages are applied to the drives frying their PCB's, causing them to go missing. Quote Link to comment
ChatNoir Posted September 12, 2022 Share Posted September 12, 2022 Did you provide power to the drives the same way as before ? (SATA power, Molex, etc.) It is possible some drives are disabled via the 3.3V pin. Quote Link to comment
Lolight Posted September 12, 2022 Share Posted September 12, 2022 (edited) 9 hours ago, Tygger said: I did just order a EVGA 850BQ It's not a quality model (low end). EVGA is a reputable brand, but it has its share of marginal low-cost PSU models which is the case with other reputable brands as well. This list should help: https://cultists.network/140/psu-tier-list/ Edited September 12, 2022 by Lolight Quote Link to comment
Tygger Posted September 12, 2022 Author Share Posted September 12, 2022 12 hours ago, JonathanM said: Why? Modular PSU's have their upsides, especially for systems with glass sides. For servers though, the fewer removable connectors the better. Every non-solid connection is a point for possible failure. The point trurl was making was that your description matches exactly a scenario we've seen a bunch of times, somebody swaps PSU's but leaves the modular drive power cables connected to the drives, and as soon as the replacement supply is turned on, the wrong voltages are applied to the drives frying their PCB's, causing them to go missing. Thanks. Missed the point. 6 hours ago, ChatNoir said: Did you provide power to the drives the same way as before ? (SATA power, Molex, etc.) It is possible some drives are disabled via the 3.3V pin. Yes, powered the same way. 4 hours ago, Lolight said: It's not a quality model (low end). EVGA is a reputable brand, but it has its share of marginal low-cost PSU models which is the case with other reputable brands as well. This list should help: https://cultists.network/140/psu-tier-list/ Appreciate it. Will take a look. Any other suggestions? Thanks Quote Link to comment
trurl Posted September 12, 2022 Share Posted September 12, 2022 2 hours ago, Tygger said: Any other suggestions? single rail Quote Link to comment
Hoopster Posted September 12, 2022 Share Posted September 12, 2022 (edited) 16 hours ago, Tygger said: I did just order a EVGA 850BQ I am not saying this is not a good PSU but I ordered an EVGA 500BQ for a light-use desktop PC and 4 weeks later it was completely dead and would not power on. Paper clip test verified it. A few other reviews mention the same problem. The inexpensive EVGA BQ models are on my "avoid" list now. Fortunately, the Amazon return/refund process was quick and painless. I ordered a Thermaltake replacement which continues to work well. I have Corsair SFX Gold PSUs in both my unRAID servers. Edited September 12, 2022 by Hoopster Quote Link to comment
Tygger Posted September 12, 2022 Author Share Posted September 12, 2022 Ok, I'm returning it. Just ordered EVGA SuperNOVA 650 P2, 80+ PLATINUM 650W. In the mean time, any tips on further trouble shooting? Thanks all Quote Link to comment
JonathanM Posted September 12, 2022 Share Posted September 12, 2022 Do the drives show up in BIOS? Quote Link to comment
Tygger Posted September 13, 2022 Author Share Posted September 13, 2022 (edited) The drives don't show up in BIOS. I've tried swapping the power and data from a drive that does work to no avail. Ithen removed the non-working HDDs and installed in a different machine and it did show up in BIOS. To recap, the SDD and 500gb HDD shows up, but the two 8TB HDDs don't. Edited September 13, 2022 by Tygger Quote Link to comment
ChatNoir Posted September 13, 2022 Share Posted September 13, 2022 2 hours ago, Tygger said: To recap, the SDD and 500gb HDD shows up, but the two 8TB HDDs don't. What are the HDDs ? Did you check that it is not the 3.3V disable issue ? Maybe your old PSU did not provide 3.3V on the SATA power cables and the new one does. The easiest way to find out is a Molex to SATA power splitter. How the old PSU did ? Is it possible that it fried the drive at the same time ? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.