RadOD Posted September 18, 2022 Share Posted September 18, 2022 Rarely something causes the Unraid GUI to freeze up and the only way to fix (clean shutdown and reboot) is from the console. It is kinda important when I need it but rare enough that I don't want to hook up its own monitor and keyboard. Conveniently I have a workstation close by so I have set up a cheap HDMI switch. The console displays correctly for a while but eventually goes black and the monitor gives a "1920x1080 resolution is recommended" notification. This sounds like the HDMI switch is screwing up the EDID somehow. Is there a way to add a boot time config setting or run a script to manually override the resolution? Is there an xranr command in Unraid somewhere? I don't see anything I recognize in the nerd tools and dev pack plug ins. Quote Link to comment
Squid Posted September 18, 2022 Share Posted September 18, 2022 You can try booting via UEFI (rename EFI~ on the flash drive to be EFI and change the first boot device in the BIOS to be UEFI:some flash drive name here Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.