Uplinkpro Posted September 24, 2022 Share Posted September 24, 2022 (edited) Not sure what happened but I had everything setup with an MS user logging in to the network shares just fine. After 6.11 when I click tower it asks for user credentials and tells me my credentials are wrong. In the WebUI I have reset the password, and in windows i have cleared all saved credentials and still nothing. I (Accidently) ran New Permissions to try to help (and destroyed all of my dockers yay) and still nothing. diagnostics below, not sure where to start. tower-diagnostics-20220924-1254.zip Edited September 24, 2022 by Uplinkpro Quote Link to comment
JorgeB Posted September 24, 2022 Share Posted September 24, 2022 Please post the output of ls -la /mnt/user Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 root@Tower:~# ls -la /mnt/user total 0 drwxrwxrwx 1 nobody users 61 Sep 24 09:53 ./ drwxr-xr-x 11 root root 220 Sep 24 09:42 ../ drwxrwxrwx 1 nobody users 43 Sep 18 03:32 .Trash-0/ drwxrwxrwx 1 nobody users 360 Sep 21 15:25 appdata/ drwxrwxrwx 1 nobody users 6 Jul 20 19:26 backups/ drwxrwxrwx 1 nobody users 27 Jul 6 00:08 data/ drwxrwxrwx 1 nobody users 254 Sep 24 09:43 docker/ drwxrwxrwx 1 nobody users 6 Sep 15 05:58 roms/ Quote Link to comment
Frank1940 Posted September 24, 2022 Share Posted September 24, 2022 Try rebooting the Windows Client as that worked for me. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 Just now, Frank1940 said: Try rebooting the Windows Client as that worked for me. first and 3rd thing I tried haha sadly no luck Quote Link to comment
JorgeB Posted September 24, 2022 Share Posted September 24, 2022 Try booting Unraid in safe mode. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 19 minutes ago, JorgeB said: Try booting Unraid in safe mode. nothings changed Quote Link to comment
dlandon Posted September 24, 2022 Share Posted September 24, 2022 Show a screen shot of the Settings->SMB Settings. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 here you go Quote Link to comment
dlandon Posted September 24, 2022 Share Posted September 24, 2022 Remove NerdPack and reboot. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 19 minutes ago, dlandon said: Remove NerdPack and reboot. Done, same issue Quote Link to comment
dlandon Posted September 24, 2022 Share Posted September 24, 2022 The log shows a lot of master browser elections to Unraid: Sep 24 10:38:40 Tower nmbd[7511]: [2022/09/24 10:38:40.683165, 0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2) Sep 24 10:38:40 Tower nmbd[7511]: ***** Sep 24 10:38:40 Tower nmbd[7511]: Sep 24 10:38:40 Tower nmbd[7511]: Samba name server TOWER is now a local master browser for workgroup WORKGROUP on subnet 172.17.0.1 Sep 24 10:38:40 Tower nmbd[7511]: Sep 24 10:38:40 Tower nmbd[7511]: ***** Sep 24 10:38:40 Tower nmbd[7511]: [2022/09/24 10:38:40.683231, 0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2) Sep 24 10:38:40 Tower nmbd[7511]: ***** Sep 24 10:38:40 Tower nmbd[7511]: Sep 24 10:38:40 Tower nmbd[7511]: Samba name server TOWER is now a local master browser for workgroup WORKGROUP on subnet 172.18.0.1 Sep 24 10:38:40 Tower nmbd[7511]: Sep 24 10:38:40 Tower nmbd[7511]: ***** Sep 24 10:43:33 Tower nmbd[7511]: [2022/09/24 10:43:33.862075, 0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2) Sep 24 10:43:33 Tower nmbd[7511]: ***** Sep 24 10:43:33 Tower nmbd[7511]: Sep 24 10:43:33 Tower nmbd[7511]: Samba name server TOWER is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.50 Sep 24 10:43:33 Tower nmbd[7511]: Sep 24 10:43:33 Tower nmbd[7511]: ***** I think you may have a conflict in the Master Browser election. This might cause SMB server lookup issues. Remove the Master Browser plugin and see if it makes a difference. Edit: Your router may also be trying to be the Master Browser. Quote Link to comment
dlandon Posted September 24, 2022 Share Posted September 24, 2022 Show the output of the following command: cat /etc/samba/smb-shares.conf It will show how the shares are set up for user access. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 3 minutes ago, dlandon said: Show the output of the following command: cat /etc/samba/smb-shares.conf It will show how the shares are set up for user access. here is the output ( i also removed the addon and yea still nothing new) root@Tower:~# cat /etc/samba/smb-shares.conf [flash] path = /boot comment = Unraid OS boot device browseable = yes # Secure public = yes writeable = no write list = case sensitive = auto preserve case = yes short preserve case = yes map archive = no map system = no map hidden = no map readonly = yes force user = root [appdata] path = /mnt/user/appdata comment = browseable = yes # Secure public = yes writeable = no write list = uplinkpro case sensitive = auto preserve case = yes short preserve case = yes [backups] path = /mnt/user/backups comment = browseable = yes # Secure public = yes writeable = no write list = uplinkpro case sensitive = auto preserve case = yes short preserve case = yes [data] path = /mnt/user/data comment = browseable = yes # Public public = yes writeable = yes case sensitive = auto preserve case = yes short preserve case = yes [roms] path = /mnt/user/roms comment = browseable = yes # Public public = yes writeable = yes case sensitive = auto preserve case = yes short preserve case = yes Quote Link to comment
dlandon Posted September 24, 2022 Share Posted September 24, 2022 Review your SMB share settings for each share. Alll your shares are set for Public access. Your flash device should not be set to Public. Set it to Private and then set desired user access. Did you intend for all your shares to be Public? If you did, you should set up users in Unraid and the set user access for each share you want them to access. Only set Public access for things that make sense for Public access. I'm wondering if your flash has some issues. I'm seeing some strange entries in your smb-shares.conf. Quote Link to comment
Uplinkpro Posted September 24, 2022 Author Share Posted September 24, 2022 4 minutes ago, dlandon said: Review your SMB share settings for each share. Alll your shares are set for Public access. Your flash device should not be set to Public. Set it to Private and then set desired user access. Did you intend for all your shares to be Public? If you did, you should set up users in Unraid and the set user access for each share you want them to access. Only set Public access for things that make sense for Public access. I'm wondering if your flash has some issues. I'm seeing some strange entries in your smb-shares.conf. The flash drive is pretty new as well thats kinda crappy, but what you say makes since about the public access, i dont have it set for that if you see in the gui, this is how they are set Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 Try Private instead of Secure for "Security". Quote Link to comment
Uplinkpro Posted September 25, 2022 Author Share Posted September 25, 2022 15 minutes ago, dlandon said: Try Private instead of Secure for "Security". Swapped it all and rebooted it changed the output but still cannot access it. Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 Can't browse to shares, or credential issues still? Quote Link to comment
Uplinkpro Posted September 25, 2022 Author Share Posted September 25, 2022 Just now, dlandon said: Can't browse to shares, or credential issues still? credential issues, i click tower it asks for login, i type the IP in and its the same. I tried root and the user i added and both fail. Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 Try one last thing, and then I'll go off and do some research if this doesn't work: /etc/rc.d/rc.samba restart Quote Link to comment
Uplinkpro Posted September 25, 2022 Author Share Posted September 25, 2022 47 minutes ago, dlandon said: Try one last thing, and then I'll go off and do some research if this doesn't work: /etc/rc.d/rc.samba restart Wish i could say it worked, it did not. Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 14 minutes ago, Uplinkpro said: Wish i could say it worked, it did not. Didn't really think it would. Just had to eliminate all possibilities. Quote Link to comment
dlandon Posted September 25, 2022 Share Posted September 25, 2022 Why are you using Jumbo frames? Use the default MTU. Quote Link to comment
Uplinkpro Posted September 25, 2022 Author Share Posted September 25, 2022 3 minutes ago, dlandon said: Why are you using Jumbo frames? Use the default MTU. My network is setup to support it but I'll change it back for debuging sake. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.