September 26, 20223 yr I had a drive failure and installed a new 10 TB SAS3 drive. Currently preclearing which seems to be going smoothly (Currently Zeroing: 19% @ 487 MB/s), but the Unraid log is showing errors constantly. Getting I/O error, dev sdi, sector ********** op 0x1:(WRITE) flags 0x104000 phys_seg 128 prio class 0 and Buffer I/O error on dev sdi, logical block XXXXXXXXX, lost async page write Is this a bad / failing disk? Something else? Thank you homegrown-diagnostics-20220926-1428.zip
September 26, 20223 yr Community Expert Looks like a bad drive: device Test Unit Ready [medium or hardware error (serious)]
September 26, 20223 yr Author 1 hour ago, JorgeB said: Looks like a bad drive: device Test Unit Ready [medium or hardware error (serious)] I think you're right. When I shut down Unraid and try to add the drive to the array, it won't take and sends it back to Unassigned Devices grayed out. Then it won't show in the dropdown to add to Array.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.