September 28, 20223 yr Hello there, I have an issue with my unraid server. One of the disks (6) has been disabled the first time a few days ago. Following that I ran the full SMART test and it reported no problems. Then I rebuilt the drive from parity. A couple of days later the disk got disabled again. In reaction to that I swapped the SATA cable and port on the main board (before it was connected to a DELL HBA). The rebuilt finished today but only a short time after the drive was again disabled due to read/write errors. I don’t want to do another rebuild without knowing how to fix the cause, so an I am hoping you can help me analyze this problem. Diagnostics are attached. Kind regards and thanks in advance Amin thor-diagnostics-20220928-1546.zip
September 28, 20223 yr Community Expert Disk6 dropped offline so there's no SMART report, when you swapped the port did you swap the cables also? Disk1 is also showing what look like power/connection issues.
September 28, 20223 yr Author Hi, thank’s for the reply. Yes, I replaced the SATA cables (with new ones) and ports for disk 1 and 6. Do you think this issue may be power-related? So I would try swapping the power cables next, rebuild again and then see how it turns out. Kind regards Amin
September 28, 20223 yr Community Expert Solution 2 minutes ago, d0pamin said: Do you think this issue may be power-related? Could be, especially if it shares a splitter/cable with disk1.
October 17, 20223 yr Author On 9/28/2022 at 8:15 PM, JorgeB said: Could be, especially if it shares a splitter/cable with disk1. Dear Jorge, I switched the splitter as well and now the problem has not occurred in two days. Therefore, I guess the problem is solved. Thank’s for your input. Kind regards
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.