Just tried upgrading from 6.9.2 to 6.11 and for some reason it looks like none of my PCI devices are being detected when it boots up because there is no drives or ethernet but I was able to login into the unraid box on 6.11 directly and get the diagnostics. I have provided diagnostics for non working 6.11 (tower-diagnostics-20220928-1303.zip) and the working 6.9.2 (nas-diagnostics-20220929-1146.zip).

 

My motherboard is the Intel Server Board S2600CP2J and the network card is the Intel Pro 1000 server adapter. 
  

Is my board too old maybe? Any help is appreciated.

 

Thanks

James

nas-diagnostics-20220929-1146.zip tower-diagnostics-20220928-1303.zip

You are virtualizing Unraid, so likely the problem is that the devices are not being passed-through or detected correctly with the new kernel.

yes i am passing through the entire pci devices not individual ports and it works fine under 6.9.2. so is virtualizing unraid no longer supported then? 

 

Thanks

James

5 hours ago, KeeWay said:

is virtualizing unraid no longer supported then? 

Virtualizing Unraid has never been supported. It's not forbidden, but it's always been, "if it works, great, if not, it's up to you to figure out how to make it work"

 

If you can figure out what needs to be changed to get it working again, and that change won't break things for people NOT virtualizing Unraid, then there is a high likelyhood that your fix will be included.

You might get some help from others doing the same if you post here:

https://forums.unraid.net/forum/46-virtualizing-unraid/