October 5, 20223 yr I've been using Unraid for a while and need to upgrade my machine to accommodate more drives. I've flashed the H710p mini to IT mode and all seems to load up fine in the new machine but I am unable to access the server via the GUI. Any help would be greatly appreciated. Cheers
October 6, 20223 yr 13 minutes ago, scurrie20 said: I'm not sure how to do this in the command line, any idea? That's explained in the link. Simply type diagnostics on the commande line, the file will be created in the log directory of the flashdrive.
October 6, 20223 yr Community Expert No link is being detected on any of your NICs, check cables/connections.
October 6, 20223 yr Author Thanks, I'm getting activity lights on both the switch and NICs, tested cables on other machines and they work fine. Any idea what I'm missing?
October 6, 20223 yr Community Expert Link detected: no Until the NICs detect a link they won't work, you can boot using the GUI mode, it might help to ckeck/set the lan config.
October 6, 20223 yr Author I've tried booting into both the GUI and GUI Safe mode and end up with a blank screen.... Appreciate your help
October 6, 20223 yr Community Expert That's a known issue with servers using a Matrox GPU, it will be fixed for v6.11.1, if you want for now you can downgrade to v6.10.3, it works there.
October 6, 20223 yr Author Worked a treat, but am now having another issue. Let me know what I've stuffed up here. Cheers sb2-diagnostics-20221006-2225.zip
October 7, 20223 yr Community Expert You can do a new config to fix that, but since v6.11.1 is available update first in case the names change again.
October 7, 20223 yr Author So I just run the new config with Preserve current assignments selected to "All" and I won't lose any data?
October 7, 20223 yr Community Expert Solution 26 minutes ago, scurrie20 said: So I just run the new config with Preserve current assignments selected to "All" and I won't lose any data? Correct, and check "parity is already valid" before array start, but like mentioned you should update first.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.