MotorN Posted October 9, 2022 Share Posted October 9, 2022 I want to swap the HBA controller. Is it just a matter of physically swapping the cards or is there more configuration required. I just completed setup and parity and would like to continue configuration but won't have a required cable to swap the HBAs for a week or 2. TIA Quote Link to comment
itimpi Posted October 9, 2022 Share Posted October 9, 2022 As long as both HBAs report the serial numbers of the drives in the same way then the swap will ‘just work’. 1 Quote Link to comment
MotorN Posted October 9, 2022 Author Share Posted October 9, 2022 (edited) Thanks for the reply, I was able to source cables locally and will pick them up tomorrow. Just to clarify "serial numbers of the drives in the same way", does that include and require the same order as well. I currently have 4 x 6TB HDDs and 2 x 800GB SSDs connected. Edited October 9, 2022 by MotorN Revision Quote Link to comment
Solution itimpi Posted October 9, 2022 Solution Share Posted October 9, 2022 4 hours ago, MotorN said: does that include and require the same order as well. Unraid does not care where drives are physically connected. It simply recognises drives using their serial numbers. 1 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.