October 29, 20223 yr Hi, First time trying to install Unraid on a DIY NAS. My NAS build: Fractal Design 804 case 1 x 10tb HDD Iron Wolf 3 x 2.5 1tb HDD Asrock Mobo H310CM-DVS Micro ATX Updated to p4.30 Asrock Intel i3 9100f Nvidia Quadro p400 GPU 8 gb 2666mhz Kingston RAM I create an unraid installation usb with a Sandisk USB, its detected in asrock BIOS i try to search the settings i have to enable like intel virtual thing, CMS but i cant seem to find IOMMU setting and pc just reboots and reboots, i cant escape the reboot cycle. I Edited November 16, 20223 yr by iweputo
October 30, 20223 yr Community Expert Do you mean it reboots during booting Unraid? If yes try booting CSM or UEFI, and normal and with the GUI mode, sometimes it makes a difference.
November 16, 20223 yr Author I managed to solve this with help from the unraid discord, the problem was i had CSM enabled and was trying to legacy boot it. I disabled CSM, went to UEFI only and tried many USBs until my oldest usb 2.0 from lexmark worked and booted automatically, no problems so far. But still i want the most durable USB as the bootable device for my unraid, so im currently searching that topic.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.