October 30, 20223 yr Title says it all. I have checked and the SATA controller is not in an IOMMU group with any of my GPUs which are passed through. To give some background, my motherboard bricked (Asus Pro WS WRX80E-SAGE SE WIFI) and I have replaced it with a new one. All drives and NVMEs are in the same location. All of the NVMEs show up correctly but neither of the hard drives do. As the title says I can see the SATA drives in the BIOS and the SATA mode is set to AHCI. I see this in the logs but of course I can't figure out where to go from here: Oct 30 10:59:27 Workstation kernel: ahci: probe of 0000:26:00.0 failed with error -22 Oct 30 10:59:27 Workstation kernel: ahci: probe of 0000:27:00.0 failed with error -22 Diagnostics attached. workstation-diagnostics-20221030-1051.zip Edited October 30, 20223 yr by SuperDodge
October 30, 20223 yr Author Adding additional context here. I checked and this motherboard is actually Rev1.1 vs Rev1 that it replaced. I have another similar setup in place with no SATA drives (all NVMEs) using Rev1.1 of the motherboard and it apparently has the same error. Do I seriously have a SATA controller that unraid isn't compatible with?
October 30, 20223 yr Author If I add acpi=off to the syslinux configuration then I see the sata drives but have no iommu groups and can't pass through my graphics cards to vfio
October 30, 20223 yr Author I was able to temporarily fix this issue by adding Quote pci=nommconf to my syslinux configuration. This is letting me limp along for now but it appears to be causing issues with some of my VMs. I got the idea from this thread: https://forum.level1techs.com/t/solved-ubuntu-22-04-on-asus-wrx80e-sage-not-detecting-usb-and-m-2/186001/3 Still searching for the right answer. Edited October 30, 20223 yr by SuperDodge
October 31, 20223 yr Community Expert Look for a BIOS update for the board, updating to Unraid v6.11 might also help because of the much newer and different kernel.
November 1, 20223 yr Author I have the newest BIOS on the board and I have Unraid 6.11.1 installed. Same issue. Open to any ideas...
November 1, 20223 yr Community Expert Possibly a board/kernel compatibility issue, you can try booting a different Linux distro to confirm.
January 27, 20233 yr I have just upgraded my Unraid 6.11.5 server to this motherboard and am experiencing the exact same issue, been trawling the BIOS for any SATA settings without any luck so far.
March 20, 20251 yr Have any of you tried this fix?: https://support.punchtechnology.co.uk/hc/en-us/articles/6636489490845-Fix-for-disappearing-SATA-ports-when-using-Ubuntu-Linux-with-ASUS-Pro-WS-WRX80E-SAGE-SE-WIFI-motherboards
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.