November 11, 20223 yr Put together a new pc to replace my aging Supermicro 2U server. When I transfer the flash, parity (10TB) and data (2x 8TB) drives to the new hardware, none of the drives show up. To verify, I installed some old 1TB drives using the same power and data cables and they 1TB drives showed up. I tried both the SATA connections on the MOBO and an LSI HBA (that was working when removed from the Supermicro) and neither worked. I put all the drives back into the the old server, along with the flash and everything came up just fine. I looked in BIOS and neither the 10TB nor the 8TB drives show but the old 1TB drives do. I am at a loss and hoping someone has some ideas.
November 12, 20223 yr Community Expert Solution Are these shucked drives? If yes they might have the 3.3v issue, you can test by connecting one of them using a molex to sata adapter.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.