November 19, 20223 yr Four days ago unraid crashed and I started getting ATA3 errors during a parity check. I canceled the parity check as it was too slow. After that I did a simple check on my drives, just copying files to and from them without any issues. They all seemed fine and the errors stopped. However I checked the logs now and the errors persist. Diagnistics is attached. What is the issue, I can't figure it out. Thanks. blunova-diagnostics-20221119-2112.zip
November 19, 20223 yr Those errors are indicative of a poor connection to the drive(s) either sata or power (SATA cabling is a very poor design). Reseat the cabling at both ends. ATA3 is WDC WD100EZAZ-11TDBA0 - disk 9 Take care not to disturb cabling adjacent to the ones you're reseating (or reseat them all)
November 19, 20223 yr Author 1 hour ago, Squid said: Those errors are indicative of a poor connection to the drive(s) either sata or power (SATA cabling is a very poor design). Reseat the cabling at both ends. ATA3 is WDC WD100EZAZ-11TDBA0 - disk 9 Take care not to disturb cabling adjacent to the ones you're reseating (or reseat them all) Thank you, I will look into that.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.