phoenixrisen Posted November 22, 2022 Share Posted November 22, 2022 Recently upgraded my hardware with some spare pc components I had around. I switched from an older board with a i5 2500k to a newer asrock b450 board using a 3600x. I am aware of the issues that earlier Ryzen cpus had and disabled c states already in bios and in config/go but it still seems to crash every couple hours. This results in the server needing to be hard reset and performing a parity check each time. IS there something else I am missing or should I just go back to the old hardware? helmmemorycore-diagnostics-20221121-2152.zip Quote Link to comment
ChatNoir Posted November 22, 2022 Share Posted November 22, 2022 The logs are stored in RAM and are lost on a reboot, you should set up a syslog server and post the file after the lock. Quote Link to comment
peterg23 Posted November 22, 2022 Share Posted November 22, 2022 This link may be helpful: https://forums.unraid.net/topic/130162-ryzen-c-states-idle-power-draw/#comment-1184743 Quote Link to comment
phoenixrisen Posted November 22, 2022 Author Share Posted November 22, 2022 Updated my bios, it seems to do better without hardlocking at disconnection but continues to drop from the network temporarily. syslog-127.0.0.1.log Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.