[email protected] Posted November 29, 2022 Share Posted November 29, 2022 (edited) Hello All, I had a disk drive fail in my array. The drive failure was showing xfs errors in the logs. I replaced the drive and UNRAID rebuilt/recovered the data to the drive and the did a parity update. The replacement drive then was having problems showing xfs errors (it was not new). I reformatted the drive and its now empty. Have I hosed all the data on that disk? Is there a way to start a rebuild on that disk again since my parity was up to date. Thanks, Clayton Edited November 29, 2022 by [email protected] add more detail Quote Link to comment
ChatNoir Posted November 30, 2022 Share Posted November 30, 2022 7 hours ago, [email protected] said: I had a disk drive fail in my array. The drive failure was showing xfs errors in the logs. I replaced the drive and UNRAID rebuilt/recovered the data to the drive and the did a parity update. The replacement drive then was having problems showing xfs errors (it was not new). I reformatted the drive and its now empty. Have I hosed all the data on that disk? Is there a way to start a rebuild on that disk again since my parity was up to date. Please attach your diagnostics to your next post. Can't be sure without looking at it, but if you say XFS errors (not disk errors) then rebuilding the drive will not solve the issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.