Unraid web gui stops working after few hours or over night

[KnightZM]

Hi everyone, ive been pulling my hair out trying to figure out whats wrong with my server. I did a few hardware upgrades and since then my web gui can stop working anywhere between 1 day to in a few hours.

 

what I did upgrade was adding a sas card and 4 additional drives. all drives cleared just fine at 4 to 5 hours each, i did them one by one. i also did move some of the hardware that was already inside as well. I have 3 pcie slots first occupied by my GTX 1070, 2nd slot the Sas card. previously my P2000 was in that slot for transcoding, I moved it down to the third slot (PCIE 2.0 4x slot). moved all my sata drives from the 8 sata ports on my motherboard to the Sas card they all picked up fine. And the additional 4 drives I added to the sata ports on the motherboard.

 

Should also mention looks like my docker apps stop working when the web gui stops as well, I do have syslogs enabled as well to save to usb as part of my troubleshooting steps. please see attached for my diagnostics file.

 

Thanks in advance

 

System build

ASUSTeK COMPUTER INC. CROSSHAIR VI HERO

AMD Ryzen 9 3900X 12-Core @ 3800 MHz

32GB DDR4 Ram

750W PSU

Quadro P2000

GTX 1070

 

zm-server-diagnostics-20221130-1840.zip

Edited November 30, 2022 by KnightZM

[JorgeB]

Start here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

[KnightZM]

13 hours ago, JorgeB said:

Start here:

https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173

 

Thanks for the reply so oddly enough it went 24 hours without restart. if it crashes again i will do the above changes with ram and PSU. although it finished a parity check today and i had 598 errors so i will probably do those corrections.

[KnightZM]

Update it crashed last night so I set ram clock to 3200mhz and disabled global c state lets hope this works! i attached a diagnostic just in case 

zm-server-diagnostics-20221203-1101.zip