December 2, 20223 yr Ran into an issue. Suddenly I was unable to access the GUI for Unraid. I attempted to use GUI mode, but it told me it was unable to connect. Not sure what's going on. Luckily the Terminal was working, so I got diagnostics. alexnas-diagnostics-20221202-1233.zip
December 2, 20223 yr Author 3 hours ago, JorgeB said: Disable SSL and see if you can access it without it. Turns out it was already disabled in ident.cfg, USE_SSL="no". So that didn't work. Edited December 2, 20223 yr by asopala
December 3, 20223 yr Then try booting in safe mode, if that doesn't help try booting with a different stock Unraid flash drive, no key needed, just to see if it's a config issue.
December 3, 20223 yr Author 5 hours ago, JorgeB said: Then try booting in safe mode, if that doesn't help try booting with a different stock Unraid flash drive, no key needed, just to see if it's a config issue. It boots in safe mode, so my guess is it's a plugin or something. Did anything in the diagnostic say which one? Edit: I'm also seeing two errors after starting Samba: "failed to connect to the hypervisor" and "Operation not supported: Cannot use direct socket mode if no URI is set. Are either of those two relevant? Edited December 3, 20223 yr by asopala
December 3, 20223 yr Solution Rename all /boot/config/plugins/*.plg then start re-enabling one by one, or a few at a time until you find the culprit. 30 minutes ago, asopala said: failed to connect to the hypervisor" I believe this one if from the VM backup plugin, but IIRC it's harmless.
December 3, 20223 yr Author 1 hour ago, JorgeB said: Rename all /boot/config/plugins/*.plg then start re-enabling one by one, or a few at a time until you find the culprit. I believe this one if from the VM backup plugin, but IIRC it's harmless. Looks like it was the Nerdpack. For anyone else who might stumble onto this, I also had to reset the networking settings.
December 5, 20223 yr On 12/3/2022 at 7:05 AM, asopala said: Looks like it was the Nerdpack. For anyone else who might stumble onto this, I also had to reset the networking settings. Thanks for posting your solution. Did you just remove the Nerdpack plugin and reset network settings? I only ask because another user says his WebUI disappeared but he had previously removed the plugin.
December 5, 20223 yr Author 18 minutes ago, electronicbard said: Thanks for posting your solution. Did you just remove the Nerdpack plugin and reset network settings? I only ask because another user says his WebUI disappeared but he had previously removed the plugin. Pretty much. That's what solved it for me. And then I manually redid my network settings in the GUI.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.