electronicbard Posted December 4, 2022 Share Posted December 4, 2022 I believe I'm experiencing the same issue as the user here: In short, the Nerdpack (I thought I upgraded to NerdTools) plugin broke something with the network settings. Most of my Docker containers are unaffected, and a VM I had running seems to be fine. I can ping the server, but when I try to connect via SSH or Telnet, I enter my password and all I'm seeing is a cursor without a command-line prompt. I'm not running in GUI mode so plugging in a monitor isn't helping, and my power button isn't set to initiate a shutdown. What in the world can I try at this point? Thanks for you time. Quote Link to comment
trurl Posted December 4, 2022 Share Posted December 4, 2022 Attach Diagnostics to your NEXT post in this thread Quote Link to comment
electronicbard Posted December 4, 2022 Author Share Posted December 4, 2022 1 hour ago, trurl said: Attach Diagnostics to your NEXT post in this thread Hi trurl, That's the thing. The WebUI doesn't exist and I'm unable to log into the CLI. Is there a way to obtain diagnostics without logging into the server? Thank you! Quote Link to comment
ChatNoir Posted December 5, 2022 Share Posted December 5, 2022 7 hours ago, electronicbard said: Is there a way to obtain diagnostics without logging into the server? As stated in the link, you can also get the diagnostics by typing 'diagnostics' on the server if you have a keyboard attached (and ideally a monitor). Then you can 'poweroff' and recover the zip file on the flash drive. Quote Link to comment
electronicbard Posted December 5, 2022 Author Share Posted December 5, 2022 2 hours ago, ChatNoir said: As stated in the link, you can also get the diagnostics by typing 'diagnostics' on the server if you have a keyboard attached (and ideally a monitor). Then you can 'poweroff' and recover the zip file on the flash drive. Thanks for the clarification. I've connected a keyboard and monitor, but all I have on the display is in the attached photo. Text is: "Unraid OS Safe Mode (no plugins, no GUI)." There's no Linux command line and the screen doesn't respond to any input. I've seen this screen before and I figured it was normal after booting into Unraid without a GUI. I also have a couple Docker containers using my GPU, so that could also explain it. Quote Link to comment
trurl Posted December 5, 2022 Share Posted December 5, 2022 Do you have a current flash backup? Quote Link to comment
electronicbard Posted December 5, 2022 Author Share Posted December 5, 2022 2 hours ago, trurl said: Do you have a current flash backup? I do have a flash backup. Two things that might be noteworthy: 1. The backup was created after these problems started 2. The most recent diagnostics file in the logs directory is from July 2022 Quote Link to comment
accelman Posted December 5, 2022 Share Posted December 5, 2022 I am having the same kind of issue except I can ssh in and all dockers are working and 2VMs are working I just cannot access webgui via ip, name etc any help here? Quote Link to comment
accelman Posted December 5, 2022 Share Posted December 5, 2022 tower-diagnostics-20221205-1716.zip Quote Link to comment
Tom90 Posted December 5, 2022 Share Posted December 5, 2022 I also have the same issue. I can't access webui but can access files on the network and docker is fine because containers are accessible. I recently went to 6.11.5 from 6.10 and the only change I made was removing nerdpack as it said it was no longer compatible. Quote Link to comment
Tydell Posted December 5, 2022 Share Posted December 5, 2022 (edited) Not sure if related or not, but today I suddenly stopped being able to get to the webgui as well. Shares and apps all worked still without issue. Navigating to http://myserverip resulted in an nginx error. https was giving me a dns error as it was trying to go to the custom myservers url with my hash in it. Ultimately I got back in by SSHing in and deleting the certs on the flash drive (ssh into server, navigate to /boot/config/ssl and rename/delete the certs folder), then reboot (sbin/reboot). After doing that, I was able to get to the http ui. Upon redoing my certs (settings/management access) and setting USE SSL/TLS to yes, I'm still unable to use ssl to get to my server. It redirects to port 80 and uses a self-signed cert, not the letsencrypt cert. The WAN Port check also fails even though I definitely have port 443 forwarded to my server. Version 6.10.2 if it matters. EDIT: Also, I didn't proactively install/update anything recently, though an autoupdate of something certainly could have happened. I've also not made any changes to my network setup either. To my knowledge, I didn't make any changes to my server or network leading up to this. EDIT2: FWIW I have NerdPack installed. Don't remember why I have it tbh. Edited December 5, 2022 by Tydell Quote Link to comment
electronicbard Posted December 5, 2022 Author Share Posted December 5, 2022 26 minutes ago, accelman said: I am having the same kind of issue except I can ssh in and all dockers are working and 2VMs are working I just cannot access webgui via ip, name etc any help here? That's strange. Have you also removed Nerdpack recently? I'm no expert, but if you're able to access the command line via SSH, you could try to initiate a graceful shutdown ("/sbin/powerdown"), then boot into safe mode, remove the plugin, and reset network settings as described in the linked topic in my first post. I've asked a clarifying question over there given what Tom90 is saying about already having removed the plugin. Quote Link to comment
electronicbard Posted December 5, 2022 Author Share Posted December 5, 2022 It occurs to me I can unplug my UPS to initiate a graceful shutdown as a last resort. It'd be nice if I could avoid that sweat, however. Quote Link to comment
RuggedRaider Posted December 6, 2022 Share Posted December 6, 2022 I'm having this same problem. can log into the GUI from my phone on local wifi but not web from my desktop Quote Link to comment
Tom90 Posted December 8, 2022 Share Posted December 8, 2022 Access to webui is back, but I've not changed anything. Is it working for others too? Quote Link to comment
ljm42 Posted December 8, 2022 Share Posted December 8, 2022 7 hours ago, Tom90 said: Access to webui is back, but I've not changed anything. Is it working for others too? There are a couple of different topics in this thread. But if you had problems for a few hours just on Monday then it was likely this: https://forums.unraid.net/topic/131964-web-gui-ssh-broke/#comment-1199606 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.