So I upgraded from 7700K (having heat issues, it was de-lided), to a Thread-ripper 2950x. I'm using an Adaptec ASR-71605 in HBA Mode, 126 G of ram and a 1080ti. 36TB array spanned on 10 SAS HHD's (one for Parity).

NOTE: The only thing I changed from build to build is the Motherboard and the CPU, All other specs are the same.

I went from 102.5 MB/s down to 4MB/s. Something that finished in 10 hours now is estimating 10 days...

I have disabled Docker entirely to make sure that its not taking a hit because of containers, I'm currently waiting for the Mover to finish to restart and see if that made a difference.

The other issue I have is when I do a restart and go in to the UI, Start the array and Firefox shows the "reload content" and if I hit resend, it asks to reboot the server, I think its because of "unclean shutdown" but I shutdown from the UI so im not sure what happened to make this occur. If I let it reboot, it come back up and does the same thing so It would be in a rebooting loop if i let it. The only way to keep it from happening is to hit cancel instead of reload.

I need help fixing this system, Otherwise Im going to have to look at other OS options, but I really do not want to move away from UnRaid

Edited December 8, 20223 yr by Mr.N3rd

I also forgot to mention that I am having horrible performance with docker installs from community applications and when editing containers. Redeploys are usually instant, now they are taking 5-8 minutes. all while the UI is unusable on a different tab in the same browser. I waited for 20 minutes while the server was "Downloading" and installing "Disk Speed" container. I have 1 Gb/s Fiber - Down and Up so Its not because of internet speeds

Edited December 6, 20223 yr by Mr.N3rd

Okay so the mover finished and all docker containers are stopped. I am finally getting parity speeds >100MB/s but it fluctuates from 140MB/s - 101MB/s. I have never really payed attention to the parity check before but it seems to be normal.

But I'm still worried about the latency in the UI and with the other issue I mentioned.

Quote

The other issue I have is when I do a restart and go in to the UI, Start the array and Firefox shows the "reload content" and if I hit resend, it asks to reboot the server, I think its because of "unclean shutdown" but I shutdown from the UI so I'm not sure what happened to make this occur. If I let it reboot, it come back up and does the same thing so It would be in a rebooting loop if i let it. The only way to keep it from happening is to hit cancel instead of reload.

 

Here is the Diagnostic file..

gifserver-diagnostics-20221206-0834.zip

Log looks normal, check is going at 125MB/s.

 

45 minutes ago, Mr.N3rd said:

Start the array and Firefox shows the "reload content"

There are know issues with Firefox, try a different browser.

So I changed over to Brave and its still doing the same thing, the Docker pulls are taking between much longer, than it used to. What factors could lead to the slower speed installs?

So I fixed the other issue, Apparently the new motherboard/CPU did not like the Mellonox-XConnect-2 10g NIC. I took it out and got the performance I was looking for. I figured it was a network issue of some kind. 

Edited December 8, 20223 yr by Mr.N3rd