December 9, 20223 yr Hi all, My unraid server started crashing every few days while I was on 6.11.3. I haven't changed any hardware that should affect the server (swapped some fans out of the case) and did not change anything material on the software side (normal updates of the apps/dockers in the ordinary course). When this started happening, I updated the OS to 6.11.5. I also checked my logs after crashing but didn't find anything from before the crash. So after upgrading I set-up syslog to remote save the logs onto the same server and that is what I have attached. Not sure what the last line item of Dec 8 and the first one on Dec 9 (when I did a hard reset) is and if that is the culprit (maybe something to do with mover?). In any case, the below time is when I hard reset the server. Dec 9 13:58:03 Beast root: Delaying execution of fix common problems scan for 10 minutes I don't have a Ryzen based server. List of hardware as follows: CPU: Intel Core i5-3470 Mobo: Asrock Extreme6 Z77 Broadcom BCM57781 NIC - disabled vt-d for it to work . GPU: GTX 660 TI (MSI) 2gb - unused/disconnected HDDs: 3x shucked WD elements 14 TB (WD140EDGZ) cache drive: 1TB Nvme via PCIe RAM: 32GB ram Any input greatly appreciated. Thanks all syslog-192.168.100.62.log Edited December 9, 20223 yr by homiek33
December 9, 20223 yr Community Expert Solution Dec 8 00:13:32 Beast kernel: macvlan_broadcast+0x10a/0x150 [macvlan] Dec 8 00:13:32 Beast kernel: macvlan_process_broadcast+0xbc/0x12f [macvlan] Macvlan call traces are usually the result of having dockers with a custom IP address and will end up crashing the server, switching to ipvlan should fix it (Settings -> Docker Settings -> Docker custom network type -> ipvlan (advanced view must be enabled, top right)).
December 9, 20223 yr Author Thanks JorgeB. I can see the option but can't change it. Let me know if I am missing something. thanks again
December 9, 20223 yr Community Expert 12 minutes ago, homiek33 said: but can't change it Docker service must be stopped first.
December 9, 20223 yr Author Thanks JorgeB. Have changed. Will report back if any further problems. If not will mark as solved. much appreciated
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.