shalafi Posted December 15, 2022 Share Posted December 15, 2022 Have installed Home Assistant as a VM with two devices connected via USB. A ZWave stick (works flawless) and a RFXTRX USB 'controller' (not sure of what to call it 😁) I have a problem with the RFXTRX, they are both passed through to the VM and all of a sudden I lost the RFXTRX (Z-Wave no problem), I checked that both were passed through and decided to reinstall and re-add all 433MHz devices, worked for a day and a reboot and then it dissapeared again. Any ideas about what I'm doing wrong, in my world the system should survice an Unraid reboot and still be able to connect ... Quote Link to comment
nathan909 Posted December 15, 2022 Share Posted December 15, 2022 I have home assistant running on a VM, my nortek zwave USB mounts upon boot 90% of the time. I uncheck the optional checkbox, not sure if that helps? Quote Link to comment
shalafi Posted December 16, 2022 Author Share Posted December 16, 2022 Tried it, didn't make it better 😢 Quote Link to comment
Solution shalafi Posted December 17, 2022 Author Solution Share Posted December 17, 2022 I just set the boot order for the USB devices, this time they got detected correctly, both of them. Lets hope it sticks 🎅 Quote Link to comment
Shesakillatwo Posted January 19, 2023 Share Posted January 19, 2023 (edited) I am experiencing an issue where my USB sticks ( I have a Sonoff, Nortek, and a 433 radio) appear to randomly loose connection with Home Assistant. How did you reset the boot order mentioned above, and what order did you use? Edited January 19, 2023 by Shesakillatwo Quote Link to comment
SEL81 Posted January 23, 2023 Share Posted January 23, 2023 Experiencing a similar issue. After reboot of Unraid the USB port that has the Sonoff Stick connected is not passed throug to the VM anymore. Both checkboxes are not ticked. That is an issue. When there is a restart of Unraid due to whatever reason the whole Zigbee stuff cannot be used as Home Assistant inside the VM does not have access to the stick. I also did not quite understand the boot order thing (changed in the Bios?). Is this a bug and or what can be done to reliably keep the passthrough setting even after Unraid reboot? Quote Link to comment
nicx Posted March 22, 2023 Share Posted March 22, 2023 On 1/23/2023 at 8:44 PM, SEL81 said: Experiencing a similar issue. After reboot of Unraid the USB port that has the Sonoff Stick connected is not passed throug to the VM anymore. Both checkboxes are not ticked. That is an issue. When there is a restart of Unraid due to whatever reason the whole Zigbee stuff cannot be used as Home Assistant inside the VM does not have access to the stick. I also did not quite understand the boot order thing (changed in the Bios?). Is this a bug and or what can be done to reliably keep the passthrough setting even after Unraid reboot? same here, after a reboot of Unraid the usb devices are missing in the vm. checkboxes in the vm config are not ticked anymore. any hint how to solve this? Quote Link to comment
SimonF Posted April 27, 2023 Share Posted April 27, 2023 3 minutes ago, nicx said: no one? Suggest you open your own support post and post diagnostics. Quote Link to comment
gshep86 Posted December 6, 2023 Share Posted December 6, 2023 Having the same issue with Home Assistant. Quote Link to comment
Nicj Posted December 30, 2023 Share Posted December 30, 2023 In Unraid VM Bios = OVMF Enable USB Boot = Yes USB Controller = 2.0 (EHCI) at the bottom select boot order. Make sure your USB devices are plugged in then tick the USB devices that are showing That combo worked for me Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.