December 20, 20223 yr Tried the tape mod on my Dell H310 to get my ram working and now all drives connected to it dont show in unraid. I can see the drives in the HBA bios. The drives were working before the tape mod so I took the tape off and still no luck. Any ideas? tower-syslog-20221220-0102.zip Edited December 20, 20223 yr by ZrandyyyZ
December 20, 20223 yr Author Update... I can see all drives and data if I manually boot from the H310 in my motherboard BIOS. There are no options in my boot priorities to set it just the unraid usb. Im stuck booting from BIOS to use all drives.
December 20, 20223 yr Community Expert Dec 19 15:53:34 Tower kernel: megaraid_sas 0000:01:00.0: Failed to init firmware Dec 19 15:53:34 Tower kernel: megaraid_sas 0000:01:00.0: Failed from megasas_init_fw 6551 RAID controller is failing to initialize, suggesting cross-flashing to LSI IT mode.
December 20, 20223 yr Author Thank you I thought that was the problem but was not 100% sure. If flashed will I lose any data? Or would the drives be detected like normal?
December 20, 20223 yr Community Expert You'd likely need to at least do a new config, and when changing from RAID to nonRAID there's a chance partitions won't be recognized by Unraid.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.