December 28, 20223 yr Upgraded from 6.9.2 to 6.11.5, having attempted several times with everything inbetween and had issues only resolved by reverting back to 6.9.2. 6.11.5 now seems to be fine, upgrading my Dell T320, however a strange issue with my Pool Devices has presented itself. They all seem to have duplicated; one version showing "not installed" the other looking normal with the disk identified etc. Everything seems to be operating fine, it just triggers my OCD to have the "not installed" devices showing. What should I be doing to clean things up? Any suggestions welcomed... tower-diagnostics-20221228-1020.zip
December 28, 20223 yr Community Expert Solution Strange that those pools don't appear in the config, stop the array, set both those ._ pools to 0 slots to delete them and that should do it.
December 28, 20223 yr Community Expert It might be worth looking in the config/pools folder on the flash drive to see if there are files corresponding to these spurious entries? If so they can be deleted.
December 28, 20223 yr Author Thanks for that pointer, I think you are right. It does look like there are duplicate spurious entries in the config/pools folder. I am not sure which ones to delete. I am assuming its the files starting with"._" as they don't look right to me? Edited December 28, 20223 yr by Krushy
December 28, 20223 yr Author 38 minutes ago, JorgeB said: Strange that those pools don't appear in the config, stop the array, set both those ._ pools to 0 slots to delete them and that should do it. Thanks JorgeB, That solution did indeed erase the duplicates, and seemingly ammended the flash config file. I am still a bit stuck on, the issue shown below.. The "cache_protected" (unassigned) duplicated as cache-protected 2, with 2 slots. Do I just drop to 1 slot and it will keep the assigned device? Or should I be assigning, effetively swapping, the "sde" drive to the "cache_protected" first? Sorry for the numpty question I have not come across this before.
December 28, 20223 yr Community Expert 29 minutes ago, Krushy said: I am assuming its the files starting with"._" as they don't look right to me? They don't, and they weren't in the diags, likely because they are hidden files, those files were not created by Unraid, they look like files macOS creates.
December 28, 20223 yr Community Expert 12 minutes ago, Krushy said: Do I just drop to 1 slot and it will keep the assigned device? Don't do this. 12 minutes ago, Krushy said: Or should I be assigning, effetively swapping, the "sde" drive to the "cache_protected" first? You can do that, and after an array start/stop you can change slots to 1 if you want, but it's not a problem if it remains as 2 slots.
December 28, 20223 yr Author 3 minutes ago, JorgeB said: Don't do this. You can do that, and after an array start/stop you can change slots to 1 if you want, but it's not a problem if it remains as 2 slots. Thanks very much for the fast response, very much appreciated!
December 28, 20223 yr Community Expert 3 hours ago, Krushy said: I am assuming its the files starting with"._" as they don't look right to me? Yes. If you use a Mac, then macOS can create files with this sort of name unless you have set a setting (not sure where) to stop it doing that on network shares. The 'g0od' files will also be human readable text files which is another way to check.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.