Hi,

 

Just wondering if these types of errors are normal for USB disks, I know I'm working on replacing them but my server used to be a Raspberry Pi so they were the only option. I am currently running a extended SMART test on these drives but Unraid is spitting errors at me right now. I have attached diagnostics.

 

Any help is appreiciated.

 

ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 14188 hours (591 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 71 00 00 00 00 40 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- e1 00 02 00 00 00 00 00 06:37:40.836 IDLE IMMEDIATE ec 00 01 00 00 00 00 00 06:37:40.835 IDENTIFY DEVICE 00 00 00 00 00 00 00 ff 06:37:40.797 NOP [Abort queued commands] 00 00 00 00 00 00 00 ff 06:37:40.756 NOP [Abort queued commands] 00 00 00 00 00 00 00 ff 06:37:39.360 NOP [Abort queued commands]

server-home-diagnostics-20230104-0336.zip

https://forums.unraid.net/topic/86337-are-my-smart-reports-bad/?do=findComment&comment=800888