Arby Posted January 4, 2023 Share Posted January 4, 2023 I have some issues with my unraid server, it seems to be full, despite have 23TB free. I suspect it might have something to do with the "Some or all files unprotected" warning next to some of the shares. One of my caches, which is a pool only have 143GB free, and manually clicking the mover isn't doing much. Please could you help me figure out what I need to? servername-diagnostics-20230104-1237.zip Quote Link to comment
JorgeB Posted January 4, 2023 Share Posted January 4, 2023 You are having issues with Protected_cache1: Jan 1 22:51:25 Arborstone kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 1 22:51:25 Arborstone kernel: ata2.00: irq_stat 0x40000001 Jan 1 22:51:25 Arborstone kernel: ata2.00: failed command: WRITE DMA EXT Jan 1 22:51:25 Arborstone kernel: ata2.00: cmd 35/00:08:60:26:71/00:00:69:00:00/e0 tag 7 dma 4096 out Jan 1 22:51:25 Arborstone kernel: res 51/04:08:60:26:71/00:00:69:00:00/e0 Emask 0x1 (device error) Jan 1 22:51:25 Arborstone kernel: ata2.00: status: { DRDY ERR } Jan 1 22:51:25 Arborstone kernel: ata2.00: error: { ABRT } Jan 1 22:51:25 Arborstone kernel: ata2.00: supports DRM functions and may not be fully accessible Jan 1 22:51:25 Arborstone kernel: ata2.00: failed to enable AA (error_mask=0x1) Jan 1 22:51:25 Arborstone kernel: ata2.00: supports DRM functions and may not be fully accessible Jan 1 22:51:25 Arborstone kernel: ata2.00: failed to enable AA (error_mask=0x1) Jan 1 22:51:25 Arborstone kernel: ata2.00: configured for UDMA/133 (device error ignored) Jan 1 22:51:25 Arborstone kernel: ata2: EH complete Jan 1 22:51:25 Arborstone kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 1 22:51:25 Arborstone kernel: ata2.00: irq_stat 0x40000001 Jan 1 22:51:25 Arborstone kernel: ata2.00: failed command: WRITE DMA EXT Jan 1 22:51:25 Arborstone kernel: ata2.00: cmd 35/00:08:60:26:71/00:00:69:00:00/e0 tag 15 dma 4096 out Jan 1 22:51:25 Arborstone kernel: res 51/04:08:60:26:71/00:00:69:00:00/e0 Emask 0x1 (device error) Jan 1 22:51:25 Arborstone kernel: ata2.00: status: { DRDY ERR } Jan 1 22:51:25 Arborstone kernel: ata2.00: error: { ABRT } Check/replace cables and post new diags after array start. Quote Link to comment
Arby Posted January 4, 2023 Author Share Posted January 4, 2023 Could this be related to the Reallocated sector yellow warning? Protected_cache 2 has a yellow warning on this with a raw value of 690. I think it has increased over the 1-2 years I've had the server. I think the cables are ok but I have been unlucky with the drive from the start. I am thinking of getting rid of the pool entirely and replacing it with just 1 big SSD - is there any documentation I can read that can show me how to replace a pool with 1 drive? Quote Link to comment
JorgeB Posted January 4, 2023 Share Posted January 4, 2023 Problem is device1, not device2 Quote Link to comment
Arby Posted January 5, 2023 Author Share Posted January 5, 2023 20 hours ago, JorgeB said: Problem is device1, not device2 That's strange, here is what the protected cache looks like: I constantly get that error sign for protected_cache 2 I have just bought another one of these drives, I am going to replace protected_cache 1 as you have said that's the one with the issue. I am going to have to update to 6.10-rc3 or later and follow your comment here, as I don't really want to go through the manual method - do you think that sounds like a good plan? I am just worried protected_cache 2 will also be problematic...there isn't a way unraid can mix up the device number can it? I can't really see protected cache 1 mentioned in the Diags you quoted Quote Link to comment
JorgeB Posted January 5, 2023 Share Posted January 5, 2023 24 minutes ago, Arby said: I constantly get that error sign for protected_cache 2 That device has SMART errors but the one missing is #1, note the missing temp, that's a sign the device is offline, see here for better pool monitoring. Quote Link to comment
Arby Posted January 5, 2023 Author Share Posted January 5, 2023 43 minutes ago, JorgeB said: That device has SMART errors but the one missing is #1, note the missing temp, that's a sign the device is offline, see here for better pool monitoring. Wow...I did not know that, that should be a blaring warning ! thank you so much. I'll get to work when the drive gets here and let you know how I get on. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.