Lordbye Posted January 5 Share Posted January 5 Hi, i have this adapter https://amz.run/6HhH and this motherboard https://bityl.co/GWby unraid doesn't recognize adapter and attached ssd. I'm using alla pci (2 - 1 eth 2,5gb and 1 nvidia gt710) and all sata (4 port) i have to install something more to use it? Quote Link to comment
JorgeB Posted January 6 Share Posted January 6 Should be plug and play, diagnostics might show something. Quote Link to comment
Lordbye Posted January 6 Author Share Posted January 6 (edited) hi, thanks. Which files can i attach? The zip file i have downloaded? or specific files? lordbyenas-diagnostics-20230106-0925.zip Edited January 6 by Lordbye Quote Link to comment
JorgeB Posted January 6 Share Posted January 6 The JMB SATA controller is not being detected, this is not a software problem, looking at the board it's likely not a shared PCIe lanes issue, but check the manual to confirm, could be a bad controller or some board/compatibility issue. Quote Link to comment
Lordbye Posted January 7 Author Share Posted January 7 ok, i'll try or i can bought another one... any suggestion about which one? Quote Link to comment
Lordbye Posted January 10 Author Share Posted January 10 i tried mine on another MB and no signal detect.. so i'll buy another one. Which is better or more compatible? https://bityl.co/GaYb https://bityl.co/GaYj Quote Link to comment
ChatNoir Posted January 10 Share Posted January 10 The second one seems to have a port multipler, not recommended. Quote Link to comment
Lordbye Posted January 12 Author Share Posted January 12 The new one is ok! i have connect 2 sdd Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.