January 12, 20233 yr I broke my Unraid USB at the worst possible time. I have reinstalled Unraid on my new USB but have no back-up. The manual states to contact the forum about reassigning the drives in the proper order to prevent data loss but does not really give further details on troubleshooting. Quote To ensure no data loss after the server is booted, you will need to make sure you assign each disk to the array / cache exactly as it was prior to the failure. If you do not know which disks were assigned where, create a post in the forum for further assistance. Please advise! Thank you. Edited January 12, 20233 yr by FaultyPants
January 12, 20233 yr Community Expert You should find this section of the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page to be of use.
January 15, 20233 yr Community Expert 7 hours ago, FaultyPants said: If there were no parity drives is that section still relevant? That section is about avoiding inadvertently assigning data drives to a parity slot so it then gets wiped. If you have no parity drives then order is probably not critical unless you have shares set to include/exclude specific drives. If so that is easily corrected.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.