January 13, 20233 yr Used the rsync command below to copy 8TB disk 3 (resierfs) to 16TB disk 2 (xfs), so I can move disk 3 to another server, but got an error at the end: rsync -avPX /mnt/disk3/ /mnt/disk2/ sent 7,049,131,125,720 bytes received 195,551 bytes 61,352,544.89 bytes/sec total size is 7,035,745,316,299 speedup is 1.00 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1336) [sender=3.2.7] Think it's just 13 GB that wouldn't copy, but struggling to find how to check the previous errors to see which files(s) were affected. How do I check this please? The following lines repeated many times in the syslog which seem to be related: Jan 12 02:32:32 Tower kernel: REISERFS error (device md3): vs-5150 search_by_key: invalid format found in block 4027868. Fsck? Jan 12 02:32:32 Tower kernel: REISERFS warning: reiserfs-5090 is_tree_node: node level 966 does not match to the expected one 2 There's still 1.5TB free on disk 2. Attached diagnostics. ------------------------------------------------------------------------------------------------------------------------- Currently in the process of converting all my disks to xfs. I'll be adding a new 18TB disk into the disk 3 slot once the 8TB has been removed. Is it better to format the existing resierfs 8TB in slot 3 to xfs, then swap it out for the new 18TB or use New Config to remove the 8TB and add the 18TB into the same slot? I'd think it's best to convert the 8TB to xfs first so just that empty disk has to rebuild instead of having to rebuild the parity leaving the array unprotected for a couple of days but just want to double check. Thank you for any assistance. tower-diagnostics-20230113-1101.zip
January 13, 20233 yr Author 4 hours ago, JorgeB said: Check filesystem on disk3 then re-run rsync. Thank you. I'm running it with --rebuild-tree now as it suggested on the read only check. Hope all goes well. Quote Comparing bitmaps..Bad nodes were found, Semantic pass skipped 3 found corruptions can be fixed only when running with --rebuild-tree
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.