January 16, 20233 yr I'm getting log memory 100% full after approximately 2 days of uptime, this isn't normal behavior, I cant figure out how to attach my diagnostic report but I'm seeing "Metadata corruption detected at xfs_dinode_verify+0xa0/0x732 [xfs], inode 0x280822ee8 dinode" come up repeatedly, no idea what it means or how to fix it, please advise
January 16, 20233 yr You have multuple problems. You have array disk problems: Jan 12 17:40:08 UberTower kernel: XFS (md2): Unmount and run xfs_repair Jan 12 17:40:08 UberTower kernel: XFS (md2): First 128 bytes of corrupted metadata buffer: Jan 12 17:40:08 UberTower kernel: 00000000: 49 4e 81 b6 03 02 00 00 00 00 03 e8 00 00 00 64 IN.............d Jan 12 17:40:08 UberTower kernel: 00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ Jan 12 17:40:08 UberTower kernel: 00000020: 5f 30 66 5e 00 00 00 00 5f 28 d6 4a 00 00 00 00 _0f^...._(.J.... Jan 12 17:40:08 UberTower kernel: 00000030: 60 36 cc 16 2c 70 4e 9e 00 00 00 00 00 00 00 00 `6..,pN......... Jan 12 17:40:08 UberTower kernel: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Jan 12 17:40:08 UberTower kernel: 00000050: 00 00 24 01 00 00 00 00 00 00 00 00 4f 03 ec 5b ..$.........O..[ Jan 12 17:40:08 UberTower kernel: 00000060: ff ff ff ff 8c d4 fa ab 00 00 00 00 00 00 00 08 ................ Jan 12 17:40:08 UberTower kernel: 00000070: 00 00 00 0d 00 34 c4 25 00 00 00 00 00 00 00 00 .....4.%........ Put the array in maintenance mode and check all your disks. Your Trip Lite UPS keeps dropping offline. Try a different USB cable and/or USB port. Jan 12 17:40:18 UberTower kernel: usb 2-1.2: USB disconnect, device number 19 Jan 12 17:40:19 UberTower kernel: usb 2-1.2: new low-speed USB device number 20 using ehci-pci Jan 12 17:40:19 UberTower kernel: hid-generic 0003:09AE:3015.0012: hiddev96,hidraw0: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART1500RM2U ] on usb-0000:00:1d.0-1.2/input0
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.