Asrock Rack X470D4u iGPU aktivieren


Recommended Posts

Moin zusammen, 

ich bin gestern leider kläglich daran gescheitert, die iGPU meiner (neuen) CPU im Bios zu aktivieren dass sie auch im Unraid angezeigt bzw. nutzbar wird. Die CPU ist eine Ryzen 5 Pro 4650G. Die CPU wird auch soweit erkannt "AMD Ryzen 5 Pro 4650G with Radeon Graphics @ 3700 MHz". Ich habe auch gefühlt 100 mal das BIOS zurückgesetzt, Punkte aktiviert, gespeichert und neu gestartet - aber se kommt beim Starten immer mehrere Fehler. 

 

"amdgpu unable to locate BIOS Rom"

"amdgpu fatal error during GPU init"

"amdgpu failed with Error"

 

Ich habe die

BMC Firmware 3.02.00

BIOS Firmware P4.20

auf dem Mainboard installiert. Vielleicht kann mir jemand der das Board mit einer aktiven iGPU seine Einstellungen im BIOS zeigen.

 

Radeon TOP habe ich schon installiert - der zeigt aber auch gar keine Aktivität an. Gut, die GPU wird ja auch nicht gefunden 😞

 

Wenn ihr mehr Infos braucht - gerne raus damit. ich Versuche in der zwischenzeit weiter zu kommen.

 

viele Grüße

 

RedAdair

 

 

Link to comment

Ah -ok 🙂

 

Nein, dort wird sie meiner Meinung nach nicht angezeigt. Ich hänge mal einen Auszug der devices Liste an.

 

IOMMU group 0:				[1022:1632] 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
IOMMU group 1:				[1022:1633] 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
IOMMU group 2:				[1022:1632] 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
IOMMU group 3:				[1022:1634] 00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
IOMMU group 4:				[1022:1632] 00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
[1022:1635] 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
[1022:1635] 00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
 	[1002:1636] 30:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev d9)
 	[1002:1637] 30:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller
 	[1022:15df] 30:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
 	[1022:1639] 30:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
Bus 003 Device 001 Port 3-0		ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002 Port 3-2		ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 004 Device 001 Port 4-0		ID 1d6b:0003 Linux Foundation 3.0 root hub
 	[1022:1639] 30:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
Bus 005 Device 001 Port 5-0		ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001 Port 6-0		ID 1d6b:0003 Linux Foundation 3.0 root hub
 	[1022:15e3] 30:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
 	[1022:7901] 31:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
 	[1022:7901] 31:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
IOMMU group 5:			 	[1022:790b] 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
 	[1022:790e] 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
IOMMU group 6:				[1022:1448] 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 0
[1022:1449] 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 1
[1022:144a] 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 2
[1022:144b] 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 3
[1022:144c] 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 4
[1022:144d] 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 5
[1022:144e] 00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 6
[1022:144f] 00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 7
IOMMU group 7:			 	[dd01:0003] 10:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
IOMMU group 8:			 	[1022:43d0] 16:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] Device 43d0 (rev 01)
Bus 001 Device 001 Port 1-0		ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002 Port 1-14		ID 046b:ff01 American Megatrends, Inc. Virtual Hub
Bus 001 Device 003 Port 1-14.1		ID 046b:ff20 American Megatrends, Inc. Virtual Cdrom Device
Bus 001 Device 004 Port 1-14.2		ID 046b:ff31 American Megatrends, Inc. Virtual HardDisk Device
Bus 001 Device 005 Port 1-14.3		ID 046b:ffb0 American Megatrends, Inc. Virtual Ethernet
Bus 001 Device 006 Port 1-14.4		ID 046b:ff40 American Megatrends, Inc. Virtual Floppy Device
Bus 001 Device 007 Port 1-14.5		ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse
Bus 002 Device 001 Port 2-0		ID 1d6b:0003 Linux Foundation 3.0 root hub
 	[1022:43c8] 16:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset SATA Controller (rev 01)
[5:0:0:0]    disk    ATA      ST8000VX0022-2EJ AV01  /dev/sdd   8.00TB
[7:0:0:0]    disk    ATA      SanDisk SDSSDHP2 6RL   /dev/sde    256GB
[10:0:0:0]   disk    ATA      WDC WD40EFRX-68W 0A82  /dev/sdf   4.00TB
[11:0:0:0]   disk    ATA      WDC WD40EFRX-68W 0A82  /dev/sdg   4.00TB
[1022:43c6] 16:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Bridge (rev 01)
[1022:43c7] 20:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1022:43c7] 20:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1022:43c7] 20:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1022:43c7] 20:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1022:43c7] 20:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1022:43c7] 20:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] 400 Series Chipset PCIe Port (rev 01)
[1a03:1150] 21:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 04)
 	[1a03:2000] 22:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 41)
 	[8086:1533] 23:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 	[8086:1533] 24:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
 	[1b21:0612] 25:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)
 	[144d:a808] 26:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
[N:0:4:1]    disk    Samsung SSD 970 EVO 500GB__1               /dev/nvme0n1   500GB

 

 

Ich habe auch mal von meinem BIOS Screenshots erstellt. Die packe ich auch mal hier dazu.

 

Vielleicht bringen die Licht ins dunkle.

 

1Main.jpg

2PBS.jpg

 

3FW.jpg

 

 

Um dann noch alles zu toppen, jetzt noch aus dem startlog die Zeilen mit den Fehlermeldungen...

 

Jan 21 10:47:59 Homeserver kernel: [drm] amdgpu kernel modesetting enabled.
Jan 21 10:47:59 Homeserver kernel: amdgpu: Virtual CRAT table created for CPU
Jan 21 10:47:59 Homeserver kernel: amdgpu: Topology: Add CPU node
Jan 21 10:47:59 Homeserver kernel: amdgpu 0000:30:00.0: enabling device (0000 -> 0003)
Jan 21 10:47:59 Homeserver kernel: [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x1002:0x1636 0xD9).
Jan 21 10:47:59 Homeserver kernel: [drm] register mmio base: 0xFCB00000
Jan 21 10:47:59 Homeserver kernel: [drm] register mmio size: 524288
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 0 <soc15_common>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 1 <gmc_v9_0>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 2 <vega10_ih>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 3 <psp>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 4 <smu>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 5 <dm>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 6 <gfx_v9_0>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 7 <sdma_v4_0>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 8 <vcn_v2_0>
Jan 21 10:47:59 Homeserver kernel: [drm] add ip block number 9 <jpeg_v2_0>
Jan 21 10:47:59 Homeserver kernel: [drm] BIOS signature incorrect 0 0
Jan 21 10:47:59 Homeserver kernel: amdgpu 0000:30:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
Jan 21 10:47:59 Homeserver kernel: [drm] BIOS signature incorrect 0 0
Jan 21 10:47:59 Homeserver kernel: amdgpu 0000:30:00.0: amdgpu: Unable to locate a BIOS ROM
Jan 21 10:47:59 Homeserver kernel: amdgpu 0000:30:00.0: amdgpu: Fatal error during GPU init
Jan 21 10:47:59 Homeserver kernel: amdgpu 0000:30:00.0: amdgpu: amdgpu: finishing device.
Jan 21 10:47:59 Homeserver kernel: amdgpu: probe of 0000:30:00.0 failed with error -22

 

Edited by RedAdair
Link to comment

Versucht habe ich das natürlich auch schon - hat aber leider auch keinen Erfolg gebracht. 
Wie gesagt - ich hatte schon gefühlt tausend mal das BIOS zurückgesetzt, gespeichert, neu gebootet und dann wieder was geändert, gespeichert neu gebootet usw. 

 

Ich denke dann ja immer ich bin der aller größte DAU der auf der Welt herumrennt ;-)

 

 

4nbiocommongfxconfiguration.jpg

5d-sub.jpg

Link to comment

Habe ich tatsächlich gerade gehabt - anscheinend habe ich mir bei einer Einstellung im BIOS dieses zerschossen. Kam über BMC nicht mehr in´s Bios rein. Also ja, Bildschirm war auch angeschlossen.

 

Muss ich Unraid noch irgendetwas "sagen" um die iGPU zu nutzen? treiber hinzufügen oder sonstiges?

Link to comment
1 hour ago, RedAdair said:
[1002:1636] 30:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev d9)

Also grundsätzlich erkannt wird die iGPU

Die Meldungen klingen allerdings nicht gut:

2 hours ago, RedAdair said:

amdgpu unable to locate BIOS Rom"

"amdgpu fatal error during GPU init"

"amdgpu failed with Error"

 

Dr Google sagt zur ersten Meldung, es könnte mit legacy/uefi Boot zu tun haben. Hast du legacy Boot aktiviert?

Link to comment

Ok, woran es jetzt zum schluss tatsächlich gelegen hat?! keine Ahnung...

 

Ich habe das Beta BIOS aufgespielt, Habe aus dem ASrock Hilfe Forum folgendes geändert:

 

Hello, i also had some issues, but after spending...a lot of time searching and trying, i found a solution for myself.

the issue for me was the CSM legacy layer causing issue, UEFI mod only worked.
i'm usinf bios 4.24 beta

in BIOS

boot option filter "UEFI only"

CSM (compatibility support module) "Custom" other and video both change to UEFI only

now restart

my unraid booted up with the GPU working, and all the errors before about reading bios rom and things are gone.

 

 

Beim Neustart wurde mir im BIOS auch eine VGA Firmware angezeigt, jetzt taucht die APU bzw. Grafikeinheit auch im UNRAID auf. 

Die Ausgabe "radeontop" funktioniert jetzt auch. 

 

Dann kann ich mich mal an das konfigurieren machen damit TVHeadend und Emby darüber transkodieren kann.

 

 

Ok, das hat auf anhieb funktioniert. Jetzt habe ich eine CPU Auslastung von ca. 10% beim transkodieren. 
Super. Hätte ich das doch früher schon gemacht 🙂

 

Edited by RedAdair
  • Like 2
Link to comment
  • 1 year later...
On 1/21/2023 at 1:34 PM, RedAdair said:

Ich habe das Beta BIOS aufgespielt, Habe aus dem ASrock Hilfe Forum folgendes geändert:

Danke für Deinen Report! Mein Board ist auf dem Weg. Nachdem ich dann gelesen hatte, dass Boards wie z.B. das aktuell unfassbar günstige MC12-LE0 genau damit Probleme hatten, die iGPU zu aktivieren, weil alles in den IPMI/BMC umgeleitet wird, hatte ich gerade ein wenig Magengrummeln, als ich Deinen ersten Post gelesen habe.

 

Bist Du jetzt weiterhin auf dem 4.24 BIOS? Auf der Website gibt es ja noch ein 4.26 BETA BIOS. Hast Du das schon mal getestet bzw. kannst dazu was sagen?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.