Windows 10gbe Card Issue


crowdx42

Recommended Posts

Hi all,

 so I just got two Mellanox MCX311A-XCAT CX311A 10gbe cards, I installed one in my Unraid server and the other in a Windows 11 machine. Unraid seems to be working fine. Both machines are connected via fiber to a TP-Link 10gbe switch,  but the Windows 11 machine is not seeing the Unraid machine when it is using the 10gbe card (I disabled it's normal NIC). Windows 11 seems to have installed the drivers for the card correctly and it shows as a 10gbe NIC in the network section but when I run a speedtest it gives me really low numbers (200mbps vs normally 900mbps).
Anyone got any idea why Windows 11 is not working correctly? Is there a better driver for Windows 11 that I should be using?
Thanks for any help.
Patrick

Link to comment

As an update here, I did a fresh Windows 11 install and I think I have a 10gbe connection BUT it is slow, only about 200mbytes writing from an NVME SSD on Windows to an NVME SSD Cache drive on Unraid. I would think I should be getting much better speeds than that (both drives are capable of 5000mbs r/w . 
I found the issue with the internet speed was vpn related as the ip was using the vpn connection instead of bypassing it, which is normally what I do with my main desktop.
Is there anything else I can check to figure out why the connection is so slow? 

Link to comment

Iperf3 is giving me 6gbps, the switch I have is TP-Link TL-SX3008F which when controlled by Omada (Ubiquiti software controller clone) it does not support Jumbo frames, only in standalone mode. Having said that, if I could get 6gbps in a transfer from Windows to Unraid, I would be more than happy with that. 
I did disable Windows Firewall and Virus scanner for testing and I get about 220mbytes in Windows, but that is still a long way off 600mbytes that iperf3 is reporting as what is possible between the two cards in standalone transfers.
 

Link to comment

So I took the switch out of the equation and I hooked up to Unraid from the Windows PC directly and hit 800mbyts per sec, so there is either a setting in the switch or the switch is just not up to it.
I may just order a Microtek switch and see how it works and return the TP-Link switch.

  • Like 1
Link to comment

As  a further update, I installed an Intel 540 T2 NIC in my livingroom PC yesterday and it is performing much better than the Mellanox in the Office PC. I have a Microtik switch arriving the middle of next week, and so I will be able to see how it performs with the Mellanox NICs. I am hoping to get 600 - 700 mbytes. The intel 540 is doing about 400mbytes, so over double what I am getting with the Mellanox. I also switched out the transceivers on the switch to TP-Link brand, hoping that there could be some sort of compatibility there, but it had no effect.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.