February 13, 20233 yr Looking for help on the above, this has happened a few times recently across disk 2 & 3. Sometimes the disk doesn't get disabled, other times I need to removed the disk from the array config, and restart, adding it again to rebuild without errors. I do have spin down enabled & they all run through a LSI2008 flashed card. unraid-diagnostics-20230213-1832.zip
February 13, 20233 yr Community Expert It's logged as a disk problem, run an extended SMART test on that disk, though theses errors can sometimes be intermittent.
February 14, 20233 yr Author Looks like its ran, here unraid-smart-20230214-1727.zipis a copy of the SMART download
February 14, 20233 yr Community Expert Solution Test passed so the disk is OK for now, but keep monitoring, any more errors and you might consider replacing it.
February 14, 20233 yr Author 1 hour ago, JorgeB said: Test passed so the disk is OK for now, but keep monitoring, any more errors and you might consider replacing it. Thanks for the help, out of interest what part of the diag would i need to be looking at?
February 14, 20233 yr Community Expert Look in the SMART report for new UNC @ LBA errors, they are also logged in a specif way on the syslog, with that controller they are logged as "critical medium error", both of those suggest it was a media error, i.e., an actual disk read error, not a cable or other problem.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.