February 21, 20233 yr Hi, I got issue. Server start to be unstable. I use server and random his stop share SMB and when I check docker most program Ii can't open. But Ii got vm Home assistant and his work fine. I can check logs but no any red errors. When I reboot server all work fine couple hour some time days and again repeat. rbk-serwer-diagnostics-20230222-0049.zip
February 22, 20233 yr Author 9 hours ago, trurl said: Is not hepfull just add link that first. Second server work stable about two years and is about 3 weeks I see this strange behavior. I check all HDD and BASIC. Then will be helpful to push me for some direction what to do but not global manual because now I can find what changes or what cause problem because when i log and can't access to docker or SMB i don't see any errors in log
February 22, 20233 yr Community Expert Those diagnostics are immediately after reboot. Are you getting an actual crash? If so, setup syslog server. Try to get diagnostics when the problems are happening.
February 24, 20233 yr Author Today is happened again, docker stop work I cannot access for most dockers. Smb stop work but vms work fine i cant connect to menu to sava syslog. To get syslog is enough to save on usb?
February 24, 20233 yr Community Expert 2 minutes ago, RBK-Serwer said: enough to save on usb? Do you mean the mirror to flash option of syslog server?
February 24, 20233 yr Author yes but i select folder in hdd is ok and if crash happend i need zip this folder and add to atachment correct?
February 27, 20233 yr Author i cant use server more that 23 hours after that server works (i can connect ) but docker not work smb not work all back again after reset. syslog 28.02
March 2, 20233 yr Author OK I little go forward I change mainboard and processor for new type and that same after some time serwer broke smb and docker until I restart. Is possible to help me I use many sorftware in my life and also Qnap. I know is Unraid more advance but some time worst than windows so many troubles. I got 5 unraid i recomended my friends and start to regneds thay also got allot problems
March 4, 20233 yr Author Wheare i can write open ticket ? to get help? i removed all plugings and also not help
March 4, 20233 yr Community Expert On 3/1/2023 at 8:01 PM, RBK-Serwer said: I change mainboard and processor Post new diagnostics
March 4, 20233 yr Author Is hard to make diagnostic. When bug "active" smb disconnected , docker not work , vm work fine. Web Ui is limited is responsive show menu but when i want download diagnostic is start prepare but cannot make done. I read one post silimar issue and person write is some plugin. I uninstall all plugins stay unsigned device, fix plugin , community and zpool all other i deleted. Is no much change server stop working about for 23-24 hours syslog rbk-serwer-diagnostics-20230302-0553.zip Edited March 4, 20233 yr by RBK-Serwer
March 7, 20233 yr Author How to open ticket forum for me, pointless if i not get help. I find what cause issue, but i don't know how to fix it. Trim enabled and scheduled for 00:00 and after start trim server stop smb and docker not work any more unlit restart.
March 7, 20233 yr My 6.11.5 was ok but my issues were mostly Web Management / emhttp error spam causing all Web Management to pretty much fail. Dockers and VM's were unaffected. I had to roll back to 6.11.3 for my issue to resolve.
March 7, 20233 yr Author Hi @Stan464 thank for response. How You know that emhttp error is log You got many spam lines? If Yes is not my case. I find what happend but dont know how to fix that serwer work fine 23 hours every day and i find issue always close to 00:00 and find what serwer lunch trim is start fail fork docker smb trouble to download diagnostick
March 8, 20233 yr Community Expert There's nothing relevant logged in the syslog, this usually points to a hardware problem, if you suspect trim is causing issues schedule it to a different time to rule that out.
March 8, 20233 yr Have you run a memtest from the bootmenu for at least a minimum of a single pass or two?
March 11, 20233 yr Author I wait for another mainboard and processor memory tested in other device 100% pass on threadripper no more than 2 dimms when i put 4 starts error. I set speed acording gui.
March 18, 20233 yr Author Serwer just lost smb. Memory Pass 24 Hour. Power supply add more 2x 1250 all checked. But Software issue stay. Can generate diagnostics just hang up
March 20, 20233 yr Author Its look like software bug. I go to 6.12.0-rc2 and 48 hours and nothing happens
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.