Elimisback Posted February 25, 2023 Posted February 25, 2023 running unraid 6.11.5. Asrock Z690 M-itx motherboard intel i5-12500 Trying to get linkreal quad nvme card that has a pex8747 on it for the bifurcation to run but doesn't boot. Here is a link to it: https://www.newegg.com/linkreal-lrnv9547l-4i-pci-express/p/14G-0600-00033 It boots perfectly without the card installed, but not with card in. I have gotten it to boot a few times but not sure how. When it doesn't boot i can't even get to bios screen. Help please. V,r Quote
MrGrey Posted February 25, 2023 Posted February 25, 2023 I'm probably missing something, but what USB stick are you using to boot? MrGrey. Quote
MAM59 Posted February 25, 2023 Posted February 25, 2023 read your MoBo's manual very carefully. Some (aka "many") have certain restrictions when using bifurbication. For instance mine does not allow a Device plugged into slot #2, others only support 8x/8x mode or totally different strange settings. I have no clue about yours, so read... Quote
Kilrah Posted February 25, 2023 Posted February 25, 2023 2 hours ago, MAM59 said: Some (aka "many") have certain restrictions when using bifurbication. His card has a PLX chip, no bifurcation. Quote
Elimisback Posted February 25, 2023 Author Posted February 25, 2023 7 hours ago, MrGrey said: I'm probably missing something, but what USB stick are you using to boot? MrGrey. I am using a Samsung 64gb plugged into the internal USB c connector Quote
Elimisback Posted February 25, 2023 Author Posted February 25, 2023 Ok more troubleshooting. My case is a Jonsbo N1 so kinda small space. I rerouted all the wires cause I thought maybe they wires were putting a strain on the card. Now i get every other boot. Scenario: I boot with card inserted it works. Restart doesn't work. Reboot without card boots. Place card back in boots up. Quote
Kilrah Posted February 25, 2023 Posted February 25, 2023 (edited) Maybe try forcing the PCIe slot speed to Gen3 in the BIOS? Edited February 25, 2023 by Kilrah Quote
Elimisback Posted February 25, 2023 Author Posted February 25, 2023 I think its possible the chip is getting to hot. I increased fan speeds on chassis and cpu to get more air to the card. Seems to be keeping it stable. Maybe I try and print a fan holder to add more cooling in future. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.