EDIT:  Literally 5 minutes after I typed this I found a setting on the travel router called DNS Rebinding Attack Protection. I disabled this and now all is working correctly. I have no idea why this only prevented the unraid gui from working and allowed the docker containers, but there it is.  I thought I would mark this solved and leave it up so if anyone else comes upon a similar issue this might help.

 

 

I have been using Wireguard on both my phone and on my laptop to access the unraid gui and multiple docker containers and it has been working fine.  I recently got a travel router (GL-MT13000) that supports wireguard and I thought I would try setting that up to access the network and GUI instead of using the client on the phone or laptop.

 

I created another peer connection in wireguard server on unraid that duplicates the other 2, then setup the connection on the travel router.  It handshakes correctly and connects and I can access the internet and docker containers, but I cannot access the unraid GUI.  

 

Any thoughts?  I have triple checked that the settings are identical between the 3 clients and the 3 peer settings on the server.  I have the static route setup on my home router, I have Local NAT set to NO.  The Travel Router peer network uses 192.168.8.x instead of the unraid network that is 192.168.1.x.

 

I am at a loss. I have been troubleshooting for 3 hours and still nothing.

Thanks everyone!

Edited February 26, 20233 yr by Rhuarc

I realize this is old but I have a similar problem. In my case I can confirm the WireGuard settings on Unraid are correct because I can open the GUI from iOS on another network, but same settings in the Beryl AX doesn't work. I can access websites fine, but cannot access the server gui. The above DNS setting is disabled already.