Silhouette UK Posted February 28, 2023 Share Posted February 28, 2023 Hi All, My server stopped responding on the network, I could not access the system at all! I rebooted the server to try to reset it and all I got was "kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 I have used a backup from my servers to replace the USB drive but the error is still occurring! I am a relative newbie to servers and Unraid so any help would be most appreciated regards, mel. Quote Link to comment
JorgeB Posted March 1, 2023 Share Posted March 1, 2023 Post a photo of the error. Quote Link to comment
Silhouette UK Posted March 2, 2023 Author Share Posted March 2, 2023 Sorry for the delay I've been away with work! Photo attached of error screen: Quote Link to comment
JorgeB Posted March 2, 2023 Share Posted March 2, 2023 Try creating a new flash drive with a stock Unraid install, no key needed, just to see if it boots. Quote Link to comment
Silhouette UK Posted March 2, 2023 Author Share Posted March 2, 2023 yes, it boots on a new drive with the stock install! Quote Link to comment
JorgeB Posted March 2, 2023 Share Posted March 2, 2023 That's good news, now backup the current flash drive, re-create from new, not from the backup, then boot once to confirm it's booting and if yes restore just the /config folder from the backup, if there are still issues after that problem could be with the config. Quote Link to comment
Silhouette UK Posted March 2, 2023 Author Share Posted March 2, 2023 So I have to go through the set up on the new drive using the GUI and use the backup feature on the dashboard? Quote Link to comment
Solution JorgeB Posted March 2, 2023 Solution Share Posted March 2, 2023 You just need to backup the /config folder from the current flash drive, all you need is there. 1 Quote Link to comment
Silhouette UK Posted March 2, 2023 Author Share Posted March 2, 2023 booted into server now 😃 all sorted! Thank you very much for your assistance, most appreciated 👍 best regards, Mel. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.