Akshay Rachapudi Posted March 3, 2023 Share Posted March 3, 2023 Hello, I am trying to setup a NAS using unraid and this is all new to me. I have a Dell Optiplex 7050M with 32 gigs of ram and a 1TB nvme m.2 for storage. I am not seeing the nvme drive in unraid but i clearly see it in the bios. I have made sure that the SATA mode was set to AHCI as well. When unraid boots I see some issues around nvme... Quote Mar 2 11:03:03 Borehole10x kernel: nvme nvme0: I/O 4 QID 0 timeout, reset controller ... Mar 2 11:05:14 Borehole10x kernel: nvme nvme0: Device not ready; aborting reset, CSTS=0x1 Mar 2 11:05:14 Borehole10x kernel: nvme nvme0: reading non-mdts-limits failed: -4 ... Mar 2 11:07:22 Borehole10x kernel: nvme nvme0: Device not ready; aborting reset, CSTS=0x1 Mar 2 11:07:22 Borehole10x kernel: nvme nvme0: Removing after probe failure status: -19 I have tried appending nvme_core.default_ps_max_latency_us=0 pcie_aspm=off to my syslinux but same results. I have also power cycled my machine multiple times to no success. the M.2 chip is brand new: Intel 670p Series M.2 2280 1TB PCIe NVMe 3.0 x4 QLC Internal Solid State Drive (SSD) SSDPEKNU010TZX1 Diagnostic attached below. borehole10x-diagnostics-20230302-1916.zip Quote Link to comment
Solution JorgeB Posted March 3, 2023 Solution Share Posted March 3, 2023 Device is failing to initialize, don't know why, do you have a different model NVMe device you could try? Quote Link to comment
Akshay Rachapudi Posted March 17, 2023 Author Share Posted March 17, 2023 Yeah I ended up testing the M.2s I have on my PC. Both of them worked fine. So it was an issue with the m.2 I was trying. Thanks for the response! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.