July 27, 201114 yr Hi, Having a problem starting the 2nd preclear on this disk. 1st preclear passed fine. New drive, with jumper 7-8, running ver 4.6 unraid, 1.7 preclear. No attributes with preclear command. Did not want to try the -D attribute and lose smart comparison data unless that is the only fix? UnRaid running fine this is a new backup drive in case I need it in the future. All other drives same size and have been configured the same way. Already tried resetting cables. Any suggestions. Thanks Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZA6073684 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Jul 27 07:42:46 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ST =0x40 ERR=0x00 NS =0x0c SC =0xbf CL =0x87 CH =0xe0 SEL=0x40 A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.$ root@Tower:/boot#
July 27, 201114 yr Hi, Having a problem starting the 2nd preclear on this disk. 1st preclear passed fine. New drive, with jumper 7-8, running ver 4.6 unraid, 1.7 preclear. No attributes with preclear command. Did not want to try the -D attribute and lose smart comparison data unless that is the only fix? UnRaid running fine this is a new backup drive in case I need it in the future. All other drives same size and have been configured the same way. Already tried resetting cables. Any suggestions. Thanks Device Model: WDC WD20EARS-00MVWB0 Serial Number: WD-WCAZA6073684 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Jul 27 07:42:46 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ Register values returned from SMART Status command are: ST =0x40 ERR=0x00 NS =0x0c SC =0xbf CL =0x87 CH =0xe0 SEL=0x40 A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.$ root@Tower:/boot# Update your version of the preclear script
July 27, 201114 yr Author Hi, Thanks for the quick reply. Update preclear got me going again. Will update to 4.7 too, once this and 1 more preclear is done. Additional THANKS to Joe L. for all the software upgrades he has done on the preclear. Please move to the appropriate subject, Thanks again!
Archived
This topic is now archived and is closed to further replies.