alitech Posted March 10, 2023 Share Posted March 10, 2023 (edited) There was an update to the docker recently which I tried to apply. Since applying, it has failed and no longer responds or works. I am wondering what could be the cause of this failure? The update failed basically. This is what it looks like now. Does not start and does not allow anything. What is the best course of action here? I had it all configured to work with my quadro card also. Edited March 10, 2023 by alitech Change Quote Link to comment
trurl Posted March 11, 2023 Share Posted March 11, 2023 Which plex docker are you using? Quote Link to comment
alitech Posted March 11, 2023 Author Share Posted March 11, 2023 Thats the thing, because I cant open or access anything on there, I cant even tell which one I was using. This was a couple of years ago I set this up. Quote Link to comment
trurl Posted March 11, 2023 Share Posted March 11, 2023 1 minute ago, alitech said: a couple of years ago I set this up. The icon for that docker makes me think it was much longer ago than that. I seem to remember back when dockers were first introduced in Unraid there was a plex docker created by limetech, but I doubt it exists any longer. Quote Link to comment
trurl Posted March 11, 2023 Share Posted March 11, 2023 Do you have any other working dockers? What do you get from command line with this? ls -lah /boot/config/plugins/dockerMan/templates-user Quote Link to comment
alitech Posted March 11, 2023 Author Share Posted March 11, 2023 Yes I have a few dockers running. I must also mention that opening up the dockers page now takes 2 mins on average to load up along with the plugins page and also the apps page. Everything has slowed to a crawl. root@Tower:~# ls -lah /boot/config/plugins/dockerMan/templates-user total 544K drwx------ 2 root root 32K Oct 9 16:55 ./ drwx------ 4 root root 32K Oct 9 16:55 ../ -rw------- 1 root root 4.5K Oct 9 16:55 my-Ali-Plex-Media-Server.xml -rw------- 1 root root 4.8K Oct 9 16:55 my-Ali-Plex-Media-Server.xml.bak -rw------- 1 root root 11K Oct 9 16:55 my-CrashPlanPRO.xml -rw------- 1 root root 4.6K Oct 9 16:55 my-MEGASync.xml -rw------- 1 root root 4.8K Oct 9 16:55 my-MEGASync.xml.bak -rw------- 1 root root 5.1K Oct 9 16:55 my-binhex-krusader.xml -rw------- 1 root root 5.3K Oct 9 16:55 my-binhex-krusader.xml.bak -rw------- 1 root root 3.6K Oct 9 16:55 my-cadvisor.xml -rw------- 1 root root 3.7K Oct 9 16:55 my-cadvisor.xml.bak -rw------- 1 root root 4.9K Oct 9 16:55 my-crushftp9.xml -rw------- 1 root root 5.0K Oct 9 16:55 my-crushftp9.xml.bak -rw------- 1 root root 6.9K Oct 9 16:55 my-vm_custom_icons.xml -rw------- 1 root root 7.0K Oct 9 16:55 my-vm_custom_icons.xml.bak -rw------- 1 root root 4.5K Oct 9 16:55 my-windows11_uupdump.xml -rw------- 1 root root 4.5K Oct 9 16:55 my-windows11_uupdump.xml.bak Quote Link to comment
trurl Posted March 11, 2023 Share Posted March 11, 2023 1 hour ago, alitech said: my-Ali-Plex-Media-Server.xml Post this file Quote Link to comment
alitech Posted March 11, 2023 Author Share Posted March 11, 2023 5 hours ago, trurl said: Post this file Thank you for your message. I am unsure of what you mean. If you can guide me on what to do, that would be suberb Quote Link to comment
Squid Posted March 11, 2023 Share Posted March 11, 2023 5 minutes ago, alitech said: If you can guide me on what to do, that would be suberb Navigate on your computer to /config/plugins/dockerMan/templates-user from the flash share on Unraid and then attach that file to your next post. Would also be great if your post your docker run command (follow the link) and pretty much would mean that you wouldn't have to post the above forementioned file Quote Link to comment
alitech Posted March 11, 2023 Author Share Posted March 11, 2023 https://www.loom.com/share/19d194a64efd4eafbc4d572802f775f2 I recorded a video Quote Link to comment
alitech Posted March 13, 2023 Author Share Posted March 13, 2023 On 3/11/2023 at 2:50 PM, trurl said: Post this file Any thoughts? Quote Link to comment
Gragorg Posted March 13, 2023 Share Posted March 13, 2023 (edited) Is that plex that Limetech released way back? If so it has been depreciated and removed from app store quite a while ago. Post the file from the USB that Squid and Trurl asked for and they can confirm which version it is. If you have to switch to a different version then spaceinvader one has a great video for moving your plex data to another version. Edited March 13, 2023 by Gragorg Quote Link to comment
alitech Posted March 14, 2023 Author Share Posted March 14, 2023 On 3/11/2023 at 2:50 PM, trurl said: Post this file No, it is not that, I just added it 2 years ago This is the one that was added by following all instructions on this video Quote Link to comment
JonathanM Posted March 14, 2023 Share Posted March 14, 2023 Here is the support thread for that container. If you can't get an answer there, lsio supports their containers via their discord channel linked in that post. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.