demoeb Posted March 10 Share Posted March 10 hi... i woke up today and saw there's a host of issues on my server. 1 drive 'not installed' and red, another "unmountable: wrong orno file system". i did SMART (quick) scan and all drives are passing, i am doing a read check but its going so slow, at <1 mb/sec so it's saying it will take 180+ days to complete. wth is going on? willing to try anything. only change that's occurred is that I added a new drive and SATA card about 1 month ago. all of these 14tb drives are less than 12 months old. should not be anythign wrong with them physically. theyre not overheating, nothing. Quote Link to comment
itimpi Posted March 10 Share Posted March 10 You are likely to get better informed feedback if you attach your system’s diagnostics zip file to your next post in this thread. 1 Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 6 minutes ago, itimpi said: You are likely to get better informed feedback if you attach your system’s diagnostics zip file to your next post in this thread. ah yes, i forgot. sorry about that. thanks for your reply!! here they are storage-diagnostics-20230310-2223.zip Quote Link to comment
JorgeB Posted March 10 Share Posted March 10 There are issues with disk6 and what I assume was disk8, check/replace cables and post new diags after array start. 1 Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 12 minutes ago, JorgeB said: There are issues with disk6 and what I assume was disk8, check/replace cables and post new diags after array start. i did a quick check before but i will again, thanks. back soon Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 18 minutes ago, JorgeB said: There are issues with disk6 and what I assume was disk8, check/replace cables and post new diags after array start. ok, checked cables, its booting now.. i didnt see any issues though, but made sure all firmly plugged in. is disk 6 being 'seen' or is it completely absent, like if i went into the BIOS would it be there? Quote Link to comment
JorgeB Posted March 10 Share Posted March 10 Disk6 was being detected, but there were what looked like power/connection issues, post new diags after array start. 1 Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 its still bad. i believe you that it might be a cable issue, can u tell me what sata port disk 6 is on mate? that'd help me a ton. new diags inc. ps thank u i really appreciate this. storage-diagnostics-20230310-2308.zip Quote Link to comment
JorgeB Posted March 10 Share Posted March 10 The unassigned 14TB disk which I assume was disk8 dropped offline right after array start: Mar 10 23:08:32 Storage kernel: ata1: softreset failed (1st FIS failed) ### [PREVIOUS LINE REPEATED 2 TIMES] ### Mar 10 23:09:17 Storage kernel: ata1: limiting SATA link speed to 3.0 Gbps Mar 10 23:09:22 Storage kernel: ata1: softreset failed (1st FIS failed) Mar 10 23:09:22 Storage kernel: ata1: reset failed, giving up Mar 10 23:09:22 Storage kernel: ata1.00: disable device So, likely still power/cable issues. 1 Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 8 hours ago, JorgeB said: The unassigned 14TB disk which I assume was disk8 dropped offline right after array start: Mar 10 23:08:32 Storage kernel: ata1: softreset failed (1st FIS failed) ### [PREVIOUS LINE REPEATED 2 TIMES] ### Mar 10 23:09:17 Storage kernel: ata1: limiting SATA link speed to 3.0 Gbps Mar 10 23:09:22 Storage kernel: ata1: softreset failed (1st FIS failed) Mar 10 23:09:22 Storage kernel: ata1: reset failed, giving up Mar 10 23:09:22 Storage kernel: ata1.00: disable device So, likely still power/cable issues. thats the new drive which i put in a sata card for. i will disconnect it, possibly its a bad card. what about disk 6? Quote Link to comment
demoeb Posted March 10 Author Share Posted March 10 46 minutes ago, demoeb said: thats the new drive which i put in a sata card for. i will disconnect it, possibly its a bad card. what about disk 6? can you tell me which file in the diagnostics i should be looking at to see which SATA port disk 6 is ? Quote Link to comment
Solution JorgeB Posted March 11 Solution Share Posted March 11 No ATA errors on disk6 for now, check filesystem. Quote Link to comment
demoeb Posted March 11 Author Share Posted March 11 3 hours ago, JorgeB said: No ATA errors on disk6 for now, check filesystem. wait what? i was checking cables for ages lol. i disconnected disk 8, i believe its this cheap sata card i bought off amazon. but i am stressing about disk 6. ok ill do what the check filesystem help page recommends - going into maintainance mode etc. thanks again for your help. Quote Link to comment
demoeb Posted March 11 Author Share Posted March 11 yay! its back up! (disk 8 physically disconnected, so is the sata card) thank you Jorge!!! 1 Quote Link to comment
JonathanM Posted March 12 Share Posted March 12 What's your plan for getting disk8 back? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.