anxiety attack time. umm... help?


Go to solution Solved by JorgeB,

Recommended Posts

hi... i woke up today and saw there's a host of issues on my server. 1 drive 'not installed' and red, another "unmountable: wrong orno file system". i did SMART (quick) scan and all drives are passing, i am doing a read check but its going so slow, at <1 mb/sec so it's saying it will take 180+ days to complete. wth is going on? willing to try anything. 

 

only change that's occurred is that I added a new drive and SATA card about 1 month ago. all of these 14tb drives are less than 12 months old. should not be anythign wrong with them physically. theyre not overheating, nothing. 

Screenshot 2023-03-10 21.45.05.png

Screenshot 2023-03-10 21.52.36.png

Link to comment
18 minutes ago, JorgeB said:

There are issues with disk6 and what I assume was disk8, check/replace cables and post new diags after array start.

ok, checked cables, its booting now.. i didnt see any issues though, but made sure all firmly plugged in. is disk 6 being 'seen' or is it completely absent, like if i went into the BIOS would it be there?

Link to comment

The unassigned 14TB disk which I assume was disk8 dropped offline right after array start:

 

Mar 10 23:08:32 Storage kernel: ata1: softreset failed (1st FIS failed)
### [PREVIOUS LINE REPEATED 2 TIMES] ###
Mar 10 23:09:17 Storage kernel: ata1: limiting SATA link speed to 3.0 Gbps
Mar 10 23:09:22 Storage kernel: ata1: softreset failed (1st FIS failed)
Mar 10 23:09:22 Storage kernel: ata1: reset failed, giving up
Mar 10 23:09:22 Storage kernel: ata1.00: disable device

 

So, likely still power/cable issues.

  • Like 1
Link to comment
8 hours ago, JorgeB said:

The unassigned 14TB disk which I assume was disk8 dropped offline right after array start:

 

Mar 10 23:08:32 Storage kernel: ata1: softreset failed (1st FIS failed)
### [PREVIOUS LINE REPEATED 2 TIMES] ###
Mar 10 23:09:17 Storage kernel: ata1: limiting SATA link speed to 3.0 Gbps
Mar 10 23:09:22 Storage kernel: ata1: softreset failed (1st FIS failed)
Mar 10 23:09:22 Storage kernel: ata1: reset failed, giving up
Mar 10 23:09:22 Storage kernel: ata1.00: disable device

 

So, likely still power/cable issues.

thats the new drive which i put in a sata card for. i will disconnect it, possibly its a bad card. what about disk 6?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.