Hi Guys-

 

Having an issue with my server that's been rock solid for the last year.  I was trying to access some local files on my nas as i've done many times before. 

 

After about 10 secs, txf goes from 120 Mb/s down to 0.  I restarted the array and saw that under the boot disk on the home page, i had an error that said "error code ENOFlash3".  After turning off my system, i put the boot drive into another PC and scanned it for errors.  When none popped up, I put the flash drive back on my unraid machine and it fired out w/o issue, this time w/o a boot drive error code.  However, still getting the same issue with transfers.  

 

I've attached my diagnostics.  After rebooting it, i created a zip backup of my OS drive.  I was under the impression that you can only swap your boot drive 1x/year so before i did that, wanted to get your input re: the diagnostics.  Also, didn't know if there was a corrupted item on the boot drive, would this backup i just made also be corrupted.  

 

My next most recent backup of the boot drive is 12/2020.  

 

Thoughts?

 

nasgard-diagnostics-20230314-1701.zip

Edited March 14, 20233 yr by omartian
more info

Were the diags saved after the problem? There's nothing relevant logged that I can see.

4 hours ago, JorgeB said:

Were the diags saved after the problem? There's nothing relevant logged that I can see.

 

I restarted the server after the issue. Should have save a diagnostic right then and there.  if it happens again, i'll do that.  Thanks for looking over it.