I have a recently new build, everything was working fine until after a recent restart and during boot I got the "eth0 Device does not exist" error. I am on version 6.11.5 and included my diagnostic info. I am very new to unraid so I am still trying to figure this all out, just not sure what is causing this issue.

tower-diagnostics-20230316-1041.zip

Mar 16 10:40:14 Tower kernel: e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): Failed to disable ULP
Mar 16 10:40:14 Tower kernel: e1000e: probe of 0000:00:1f.6 failed with error -2

 

NIC is failing to initialize, any recent hardware/software changes?

Ive re-seated my m.2 (that is only used for VM) and I moved a couple of my case fans from 1 of the mobo slots to daisy chain off the CPU because they are 3 pin and were running at 100% in that slot. Other than that no changes.

 

I tried a couple different cables in both of my ethernet slots. I get flashing lights but still get the error

It's not a cable problem, try with a different NIC if available.

I don't have another, I just have what is built into my motherboard. Or do you mean try booting the unraid usb on a different computer?

That NIC is not working, so best bet is to get a new NIC (or use a different board/computer if available).

 

 

Yea, it looks to be an issue with the NIC. Tried running an windows install on that motherboard, but couldnt detect a network, then tried my unraid key on a different computer and no issues finding a network. The motherboard is less than a month old, so should be an easy replace at least. Thanks for you help