Hersonrah96 Posted March 27, 2023 Share Posted March 27, 2023 Hello, hope all is well. I was trying to change a disk share into a user share. background: I added a new hdd (4tb to match other hdds), but it was added on the wrong slot (it was precleared prior to adding to the array). I unassigned the new hdd and it was showing 'missing' on unraid 'main' tab. I set up a new config while keeping pool setup for cache to remove the 'missing' label from the new hdd. The parity drive was set up as parity again and the original hdd was set up in as 'disk 1' (before it was 'disk 1', but slot 0 was empty, which is where I added the new hdd). the new hdd was precleared again and added to the array. Issue: when I go to the 'shares' tab, it shows this: the shares I had previously made are only in the 'disk shares'. Thank you in advance, Quote Link to comment
JonathanM Posted March 28, 2023 Share Posted March 28, 2023 Attach diagnostics to your next post in this thread. Quote Link to comment
Hersonrah96 Posted April 1, 2023 Author Share Posted April 1, 2023 On 3/27/2023 at 9:43 PM, JonathanM said: Attach diagnostics to your next post in this thread. I apologize for the delay. I've attached the serve diagnostics tower-diagnostics-20230401-1127.zip Quote Link to comment
JorgeB Posted April 2, 2023 Share Posted April 2, 2023 On 3/28/2023 at 12:21 AM, Hersonrah96 said: the shares I had previously made are only in the 'disk shares'. Not sure what you mean, disk1 is a disk share, and you should not have a user share with the same name. Quote Link to comment
Hersonrah96 Posted April 4, 2023 Author Share Posted April 4, 2023 On 4/2/2023 at 4:49 AM, JorgeB said: Not sure what you mean, disk1 is a disk share, and you should not have a user share with the same name. My bad, what I am trying to do is change the "disk shares" from disk1 to be a "user share". Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 You cannot do that, any top lever folder in disk1 should create a user share, post output of: ls -l /mnt/disk1 Quote Link to comment
Hersonrah96 Posted April 4, 2023 Author Share Posted April 4, 2023 (edited) this is the output: Alabanzas/ Ao/ Cameras/ F---x/ Hn/ Iglesia/ Ro/ Videos-Predicas/ backupappdata/ domains/ isos/ nextcloudstorage/ system/ Edited April 4, 2023 by Hersonrah96 privacy Quote Link to comment
Hersonrah96 Posted April 4, 2023 Author Share Posted April 4, 2023 I believe I have figured something out. I used unbalance to move the content from disk1 to disk2; this caused the share that was stored on disk1 to be visible in the "user share" section and I am able to access it Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 OK, and all those folders should be user shares. Quote Link to comment
Hersonrah96 Posted April 4, 2023 Author Share Posted April 4, 2023 3 minutes ago, JorgeB said: OK, and all those folders should be user shares. got it, would there be any safety measures I should consider going forward? Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 Nothing special regarding this. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.