dafuzz Posted March 29, 2023 Share Posted March 29, 2023 (edited) Good day, as stated i have an issue where im trying to pass through a quad NIC to a VM However when trying to pass the NIC through, it states 2 of 4 ports are being used by unraid Any suggestions would be great thanks Edited March 29, 2023 by dafuzz Solved Quote Link to comment
JorgeB Posted March 29, 2023 Share Posted March 29, 2023 Please post the diagnostics. Quote Link to comment
dafuzz Posted March 29, 2023 Author Share Posted March 29, 2023 Hey thanks for the reply. here are the diags as requested tower-diagnostics-20230329-1039.zip Quote Link to comment
JorgeB Posted March 29, 2023 Share Posted March 29, 2023 eth0 is your main NIC, and eth1 is configured for DHCP, I don't see any extra NICs, what NIC do you plan to leave for Unraid? Quote Link to comment
dafuzz Posted March 29, 2023 Author Share Posted March 29, 2023 (edited) The NIC that is on the motherboard is the default network interface for unraid. installed the quad NIC last night again after removing it some time ago in the past im quite sure i was able to passthrough all 4 ports as you can see on the screenshot i posted there is a quad nic there and its allowing me to passthrough 2 of the 4 ports Some additional info. i had to turn on PCIe ACS override to split them into their own IOMMU groups Edited March 29, 2023 by dafuzz Quote Link to comment
Solution JorgeB Posted March 29, 2023 Solution Share Posted March 29, 2023 Aah, the NICs use the same driver so didn't notice one was the onboard, remove the DHCP configuration from eth1, since it's together with eth2 it might than allow you to pass-through both. Quote Link to comment
dafuzz Posted March 29, 2023 Author Share Posted March 29, 2023 (edited) Thanks, i tried what you suggested. Its still greyed out as shown in the screenshot. Also rebooted the host EDIT : Noticed that the devices also had bridging on, i think i was messing with that quite some time ago. Disabled that with the DHCP and now i can pass them through Thank you for the helping hand Edited March 29, 2023 by dafuzz 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.