Kjetil Posted April 3, 2023 Share Posted April 3, 2023 (edited) Hello, I just got a message that "array health rapport (fail)", during a parity check. Had a power out in the house. Parity check said zero errors. The diagnostics are added here. Would be great if someone more knowledgeable than me could have a look to see if all is ok, or if something need attention. Cheers, Kjetil federalreserve-diagnostics-20230403-2210.zip Edited April 3, 2023 by Kjetil Quote Link to comment
MrGrey Posted April 4, 2023 Share Posted April 4, 2023 8 hours ago, Kjetil said: Parity check said zero errors. What is the problem? Is everything working?... Cutting power to an "array" isn't recommended, but doesn't have to be fatal. Check everything. Do you have backups? MrGrey. Quote Link to comment
Kjetil Posted April 4, 2023 Author Share Posted April 4, 2023 Everything is working fine as of now, but I had the error message. I did not cut the power myself off course, it was a power out from the electric company. Backups? Some, but not all. Its 28 disc + 2 parity in the raid, so impossible for me to backup everything. Was just curios if someone with more technical knowledge than me could take a look at the diagnostics to see if something need attention... Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 Post the complete array status report, there should be more info there. Quote Link to comment
Kjetil Posted April 4, 2023 Author Share Posted April 4, 2023 Hi Jorge. Where can I find the complete array status rapport? Cheers, Kjetil Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 Tools -> Archived Notifications, then click on the date/time of the last one to expand. Quote Link to comment
Kjetil Posted April 4, 2023 Author Share Posted April 4, 2023 Thank you. Here is a copy of the last message, I found no way to download it, so I took a screenshot. Same message as before. Could it be that one of the disks was hot during the test? I read on the forum that a hot disk might make the status rapport fail. Quote Link to comment
JorgeB Posted April 4, 2023 Share Posted April 4, 2023 This is the problem, improve cooling or set a higher warning temp for this disk. 1 Quote Link to comment
ezhik Posted April 4, 2023 Share Posted April 4, 2023 One of your drives is running hot, and yes - most likely when the validation happened your drives were above the 45C threshold. A recommendation given above is valid, improve air flow - you want your drives running cool. Quote Link to comment
Kjetil Posted April 4, 2023 Author Share Posted April 4, 2023 Thanks everyone for the kind help. I will look into improving the cooling. Cheers, Kjetil Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.